SL-HEATSINK-35x35x10-A is the extruded aluminium heatsink with pins, dedicated to SLC5 single board computer (TitanSBC-8Mmini). Plastic pins enable convenient mounting of the heat sink to the SBC board.
We recommend using a thermally conductive spacer AGT-160 30x30x2,0 mm or AGT-159 30x30x1,0 mm (both: 6W/mK) between the radiator and electronic components.

Heatsink performance chart is presented below.

Manufacturer
Responsible person
AG Double-sided adhesive, thermally conductive thermopads are used where it is not possible to use thermally conductive paste. They are very flexible. They are characterized by high compressibility which ensures a good fit to elements that require cooling. AG Termopasty ART.AGT-159
AG Double-sided adhesive, thermally conductive thermopads are used where it is not possible to use thermally conductive paste. They are very flexible. They are characterized by high compressibility which ensures a good fit to elements that require cooling. AG Termopasty ART.AGT-160
Angled male socket, wire-board type, for JST PH-2.0 wires, 5-pin, 2mm pitch, 100V, 2A. Set of 10 pieces
Angled male socket, wire-board type, for JST PH-2.0 wires, 6-pin, 2mm pitch, 100V, 2A. Set of 10 pieces
No product available!
Angled male socket, wire-board type, for JST PH-2.0 wires, 8-pin, 2mm pitch, 100V, 2A. Set of 10 pieces
Angled male socket, wire-board type, for JST PH-2.0 wires, 10-pin, 2mm pitch, 100V, 2A. Set of 10 pieces
Camera set with IMX477 sensor with 12 MPx matrix, allows for remote camera rotation, tilt angle and zoom control. Works with Raspberry Pi minicomputers. Swivel base included. ArduCAM B0167B12
Power cord with a length of 45 cm with a male XT60 plug and a DC Jack 5.5 x 2.5 mm plug. It allows you to connect a battery with an XT60 socket to a device with a DC socket
Wireless communication module based on the NRF24L01 chip. It is designed for SMD mounting and will be perfect for the construction of small devices
External case designed to protect, transfer and store data on M.2 SSD drives with PCI-E (NVMe) interface. Equipped with a USB 3.1 interface with a C type connector. Orico M2PV-C3
No product available!
Step-Down converter with an output voltage of 5 V, an input voltage of 6.5 to 16 V and a maximum current of 4 A
Cable with plug and socket USB 2.0 type. A, cable length 0.5 m. Equipped with a switch
Programmable watch with ESP32. Equipped with a touch screen display, power management, RTC clock, vibration motor, loudspeaker and Lithium battery. LiliGo T-WATCH-2020
Mini MP3 player with microSD card support. It can work as a separate device and play sounds from the card or be controlled via the UART serial interface.
MP3 player with support for microSD cards and USB memory. It can work as a separate device and play sounds from a card or pendrive
No product available!
Step-Up converter with an output voltage of 12 to 80 V, an input voltage of 8 to 60 V and a maximum current of up to 20 A
Step-Up converter with an output voltage of 5 V, an input voltage of 0.9 to 5 V and a maximum current of 0.48 A
Step-Down converter with an output voltage of 5 V, input voltage from 9 to 36 V and a maximum current of 5 A. The board is equipped with a DC input connector and an output USB connector
No product available!
Extruded aluminium heatsink with pins, dedicated to SLC5 single board computer (TitanSBC-8Mmini). Thermal resistance 15.2K/W, maximum dissipation loss 4.2W