• New
Main view
search
  • Main view
  • Side view
  • Front view
  • Side view
  • DIN rail mounting
  • Kit includes
  • Size
ID: 1210370
38517655
zł284.04
Tax included

zł230.93 tax excl.

IRIV IO Controller industrial controller featuring a dual-core Raspberry Pi RP2350 microcontroller operating at 150MHz, designed for signal monitoring and device control in automation systems. Equipped with 11 isolated digital inputs, 4 isolated digital outputs, 2 analog 12-bit inputs, RJ45 Ethernet, and an isolated RS485 interface. Preprogrammed as a Modbus RTU I/O expander with a counter function. The metal enclosure supports DIN rail mounting, while the power supply operates from 10V to 30V DC. Cytron IRIV-IOC

24h
Available
Available quantity: 1
Kamami is the official distributor of Cytron modules and development kits. All products of this brand in our offer are original and come directly from the manufacturer.

Description

The Cytron IRIV IO Controller industrial controller with a Raspberry Pi RP2350 microcontroller is designed for sensor data acquisition, machine monitoring, and device control in automation systems. Equipped with a dual-core ARM Cortex-M33 processor operating at 150MHz, 520kB SRAM, and 2MB Flash memory. Preprogrammed as a Modbus RTU I/O expander with a counter function, the controller supports integration with supervisory control systems.

Cytron IRIV IO Controller - front panel interface diagram

Interfaces and Front Panel

The controller provides 11 galvanically isolated digital inputs and 4 galvanically isolated digital outputs, supporting voltages up to 50V. Two 12-bit analog inputs support voltage or current measurements. Screw terminals facilitate the connection of sensors, control signals, and actuators.

The front panel also features an RJ45 Ethernet port with a W5500 controller, an isolated RS485 interface, and a USB Type-C port for programming and configuration. RESET, BOOT, and USER buttons provide device control, while LED indicators display power, communication bus, input, and output status.

Configuration Switches

The rear side of the enclosure features analog input mode switches. They allow the two channels to be configured for voltage measurements from 0V to 10.56V or current measurements from 0mA to 42.58mA. The input configuration supports integration with industrial sensors and signal transmitters.

A separate RS485 termination switch controls the bus termination resistor. It enables proper termination of the communication line when the controller is installed at the end of an RS485 bus.

Cytron IRIV IO Controller - analog input mode and RS485 termination switches

The controller features a PCF85063A real-time clock, a programmable LED, and a passive buzzer. It operates from a 10V to 30V DC power supply with surge protection. The metal enclosure with passive cooling supports DIN rail mounting in industrial control cabinets. Custom firmware can be developed using C/C++, MicroPython, and CircuitPython.

               p1210370-top%20and%20botom%20unit.jpg

The IRIV IO Controller supports data acquisition, machine monitoring, process control, and industrial automation system expansion. It can operate alongside the Cytron IRIV PiControl as a distributed I/O module, with the supervisory controller handling data processing and system management.

Features

  • Manufacturer: Cytron Technologies
  • Model: IRIV IO Controller
  • Manufacturer code: IRIV-IOC
  • Microcontroller: Raspberry Pi RP2350
  • Processor: 2 × ARM Cortex-M33, 150MHz
  • SRAM: 520kB
  • Flash memory: 2MB
  • Digital inputs: 11, galvanically isolated, up to 50V
  • Digital outputs: 4, galvanically isolated, up to 50V
  • Analog inputs: 2, 12-bit resolution
  • Voltage measurement range: 0V to 10.56V
  • Current measurement range: 0mA to 42.58mA
  • Analog input mode selection: switches
  • Ethernet: 1 × RJ45, W5500 controller
  • RS485 interface: 1, galvanically isolated
  • RS485 termination: switch
  • Preinstalled firmware: Modbus RTU I/O expander with counter function
  • USB port: USB Type-C for programming and configuration
  • Real-time clock: PCF85063A
  • Buttons: RESET, BOOT, USER
  • Indicators: programmable LED, power, RS485, DIN and DOUT status LEDs
  • Audio indication: passive buzzer
  • Power supply: 10V to 30V DC
  • Power input protection: surge protection
  • Enclosure material: metal
  • Cooling: passive, fanless
  • Mounting: DIN rail
  • Dimensions: 140 × 60 × 36mm

Kit includes

  • Cytron IRIV IO Controller industrial controller
  • Mini flat screwdriver
1210370

Manufacturer

  • BTC Korporacja sp. z o. o.
  • Ludwinowo Zegrzyńskie 52G
  • 05-140 Ludwinowo Zegrzyńskie
  • Poland
  • [email protected]
  • 22 767 36 20

Responsible person

  • BTC Korporacja sp. z o. o.
  • Ludwinowo Zegrzyńskie 52G
  • 05-140 Ludwinowo Zegrzyńskie
  • Poland
  • [email protected]
  • 22 767 36 20

You might also like

Other products in the same category (16)