zł298.76 tax excl.
Industrial I/O controller with a built-in MQTT gateway for equipment monitoring and data transmission to IoT systems; RP2350 microcontroller running at 150 MHz; RJ45 Ethernet; isolated RS485 interface with Modbus RTU support; 11 digital inputs, 4 digital outputs and 2 analog 12-bit inputs; configuration through a web browser without programming; 10 V to 30 V DC power supply; dimensions of 140 x 60 x 36 mm. Cytron IRIV-IOC-MQTT
Industrial input/output controller designed to collect data from machines, sensors and automation installations and transmit it to systems using the MQTT protocol. The Cytron IRIV IO Controller MQTT comes with pre-installed MQTT gateway firmware, enabling input states and measurement data to be transmitted in JSON format. Configuration is performed through a local web interface without writing code. The controller can be used for machine monitoring, alarm event logging, building automation and remote supervision of technical installations.
The controller features a Raspberry Pi RP2350 microcontroller with a dual-core Arm Cortex-M33 processor running at 150 MHz, 520 KB SRAM and 2 MB Flash memory. Network communication is provided through an RJ45 Ethernet port with a W5500 controller, while a galvanically isolated RS485 interface supports devices using Modbus RTU. Field signal connections include 11 isolated digital inputs, 4 isolated digital outputs and 2 analog inputs with 12-bit resolution. The analog inputs can be configured to measure voltages from 0 V to 10.56 V or currents from 0 mA to 42.58 mA.

The web interface allows individual channels to be mapped to MQTT topics, transmission parameters to be configured, Quality of Service (QoS) levels to be selected, and message retention settings to be adjusted. The Report-by-Exception (RBE) function reduces data transmission by publishing updates only when signal values change or configured thresholds are exceeded. The diagnostic dashboard displays current input and output states, device uptime, available memory and connection information. Test MQTT publishing and manual Modbus RTU register reading functions are also available.
The gateway firmware uses standard MQTT over port 1883, without built-in TLS/SSL encryption support. For communication with external services requiring encryption, data can be routed through a local broker or an intermediate gateway supporting TLS. The controller operates from a 10 V to 30 V DC power supply and features surge protection. Electrical isolation of the industrial interfaces helps reduce the effects of interference in automation installations.
Manufacturer
Responsible person
IRIV IO Controller industrial controller featuring a dual-core Raspberry Pi RP2350 microcontroller operating at 150MHz, designed for signal monitoring and device control in automation systems. Equipped with 11 isolated digital inputs, 4 isolated digital outputs, 2 analog 12-bit inputs, RJ45 Ethernet, and an isolated RS485 interface. Preprogrammed as a Modbus RTU I/O expander with a counter function. The metal enclosure supports DIN rail mounting, while the power supply operates from 10V to 30V DC. Cytron IRIV-IOC
KAmod DMX512 is a DMX signal converter that enables communication between a computer and a stage lighting system. It is equipped with full galvanic isolation, supports up to 512 devices, has a transmission range of 1200 m, is powered via a USB-C port, and is compatible with various programs, making it ideal for professional use in theaters, clubs, and concerts
Outdoor LoRaWAN EU868 gateway designed to receive data from wireless sensors and transmit it to the SenseCAP platform via Ethernet or 4G LTE. Equipped with a TI AM3358 Cortex-A8 1 GHz processor, SX1302 concentrator, 512 MB RAM, and 8 GB eMMC storage. Supports eight receiving channels and one transmitting channel, features an IP66-rated enclosure, and operates at temperatures from -40°C to 70°C. Designed for smart agriculture, environmental monitoring, and distributed IoT installations. Seeed Studio 102991154
No product available!
Motor circuit breaker with CLASS 10 tripping class. It is adapted to work in systems supplied with 690 V, with a rated operating current range from 2.8 to 4 A. Siemens 3RV2011-1EA10
Siemens 3LD2054-0TK53 is a three-pole 16A emergency switch, IP65, designed for front mounting, ensuring safe circuit disconnection.
No product available!
IoT Gateway with ESP32, offering Wi-Fi, BLE, Ethernet, RS232/485, DI/DO and AI 4-20mA ports, ideal for industrial IoT applications. Supports Arduino IDE, ESP-IDF and cloud platforms like AWS, enabling easy integration in monitoring, automation and smart farming systems. PUSR USR-EG118
No product available!
A 750W DC servo drive controller designed for applications requiring high precision and dynamics. It supports pulse and analog control, CANopen communication, encoder signals, and master-slave operation, enabling the development of advanced multi-axis systems. The device operates from a low-voltage DC power supply and offers a rated current of 25A and a peak current of up to 80A. Kinco FD134S-CB-00
Industrial IoT gateway equipped with 2 RS485 ports, an RJ45 Ethernet port, and Edge Computing, protocol conversion, and local SD card data buffering capabilities. It enables data acquisition from Modbus RTU, Modbus TCP, and DL/T645-2007 devices, local data processing, and secure transmission to cloud platforms via MQTT or TCP protocols with SSL encryption support. USR-N720-ETH Edge IoT Gateway
No product available!
A 7-in-1 weather station designed to monitor temperature, humidity, pressure, solar radiation, sunshine duration, precipitation intensity, and wind speed and direction in harsh outdoor conditions. A rugged, industrial-grade design with an IP66 rating and a thermostatically controlled heating system ensure reliable and accurate measurements even in extreme temperatures. Ultrasonic wind sensors with no moving parts and radiation shields enhance durability and measurement precision. The device offers flexible connectivity to monitoring and automation systems via RS485, SDI-12, ASCII, and M12 interfaces. Seeed Studio 101991141
No product available!
A 6-in-1 weather station designed to monitor temperature, humidity, pressure, wind speed and direction, and light intensity in harsh outdoor conditions. A rugged, industrial-grade design with an IP66 rating and a thermostatically controlled heating system ensure reliability even in extreme temperatures. Ultrasonic wind sensors with no moving parts and radiation shields ensure accurate and durable measurements. The device offers flexible connectivity to monitoring and automation systems via RS485, SDI-12, and ASCII interfaces. Seeed Studio 101991232
No product available!
Digital input/output module with 8 DI channels and 8 DO channels, equipped with an Ethernet interface supporting Modbus TCP/RTU and PoE power supply. Enables remote control and monitoring of signals in industrial automation systems, featuring galvanic isolation and advanced operating modes. Waveshare Modbus POE ETH IO 8CH
No product available!
Four-channel module for monitoring voltage, current and power in DC circuits, featuring RS485 interface and Modbus RTU protocol support. Provides high-precision 16-bit measurements and galvanic isolation, suitable for industrial automation and monitoring systems. Waveshare Modbus RTU DC Monitor
Industrial 8-channel PWM input module with RS485 interface and Modbus RTU protocol, enabling measurement of PWM signal frequency and duty cycle with galvanic isolation. Supply voltage 7-36 V. Waveshare Modbus RTU PWM Input 8CH
Industrial 4-channel PWM output module with RS485 interface and Modbus RTU protocol, featuring adjustable frequency and duty cycle with galvanic isolation. Supply voltage 7-36 V. Waveshare Modbus RTU PWM Output 4CH
No product available!
Industrial carrier board for Raspberry Pi Compute Module 5 with Gigabit Ethernet, support for optional 4G/5G/LoRa modules, M.2 B Key and M.2 M Key slots, 4K HDMI, dual MIPI, USB 3.2 Gen1, dual isolated RS485 and isolated CAN. Waveshare CM5-IO-WIRELESS-BASE
No product available!
Dual-channel strain gauge transducer designed for use with load cells and strain gauge bridges. Features two independent measurement channels and two configurable analog outputs operating in 0-10 V voltage mode or 0-20 mA and 4-20 mA current modes. The USB-C interface with serial port emulation enables parameter configuration, taring, calibration, and measurement readout in grams. Powered by 24 V DC, the module is designed for weighing systems, automation, and load monitoring applications. MODIG MD61001
Industrial NTP Stratum 1 time server for synchronizing devices and systems with accurate UTC time without Internet access; GNSS-based synchronization; NTP accuracy over Ethernet of ±1 ms; over 300 NTP requests per second; 10/100 Mbps Ethernet; RS232 and RS485; digital inputs and outputs; Modbus RTU/TCP and MQTT support; 9-30 VDC power supply; RutOS operating system. Teltonika NTP001
Industrial I/O controller with a built-in MQTT gateway for equipment monitoring and data transmission to IoT systems; RP2350 microcontroller running at 150 MHz; RJ45 Ethernet; isolated RS485 interface with Modbus RTU support; 11 digital inputs, 4 digital outputs and 2 analog 12-bit inputs; configuration through a web browser without programming; 10 V to 30 V DC power supply; dimensions of 140 x 60 x 36 mm. Cytron IRIV-IOC-MQTT