ESP-01 - WiFi module with ESP8266 and antenna
ID: 235041
5906623473144
zł10.41
Tax included
zł8.46 tax excl.
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.
Description
Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable to nearly everywhere, where reliable and effective data transmission is needed. The module contains an integrated microstrip antenna, thanks to which the dimensions of the module allow you to save space while maintaining functionality. The communication connector is a double-row goldpin, thanks to which it is possible to place the module for e.g on a contact board or connect cables with an Arduino board whose interfaces are supplied with 3.3V voltage.
The module operates in the 802.11 b / g / n standard (2.4 GHz).
Features
- Supply voltage: 3.3V
- Power consumption: 300 mA
- He works in WiFi 802.11 b/g/n standards; 2.4 GHz frequency<l/li>
- Works in Access Point, Standalone and combined mode (AP + STA)
- Supports LwIP
- Controlled by AT commands using UART
- Built-in antenna
- Supports WPA / WPA2 security
- 2x4 goldpin connectors with 2.54mm pitch
- Approximate dimensions: 25x14.5mm
Attention!
The bus operates at 3.3V
The bus operates at 3.3V
235041
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05
zł16.06
24h
Available quantity: 20
Available
Module with a relay and WiFi communication. Compatible with ESP-01 or ESP-01S
zł9.63
24h
Available quantity: 1
Available
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
zł5.73
24h
Available quantity: 4
Available
Other products in the same category (16)
ESP8266-DevKitS – a board for quick programming and launching of ESP8266 modules without soldering. Ideal for IoT prototyping. Espressif ESP8266-DevKitS
zł55.90
24h
Available quantity: 2
Available
The base board for the Wi-Fi NodeMCU module (ESP-12E), thanks to the built-in L293DD system, allows for attaching e.g. motors, electromagnets or other executive devices. The I/O lines of the NodeMCU module were derived to the pin connectors, and the power supply can be connected with the use of screw connectors. ESP12E Motor Shield
zł7.07
24h
Available quantity: 10
Available
ESP-PROG is an advanced tool for programming and debugging Espressif microcontrollers such as ESP32, ESP32-C3, ESP32-S2, ESP32-S3 and ESP8266. With the built-in FT2232HL USB bridge, ESP-PROG converts the USB 2.0 interface to serial and parallel interfaces, offering functions of automatic firmware download, serial communication and online debugging via JTAG
zł80.90
24h
Available quantity: 5
Available
WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266
zł41.62
24h
Available quantity: 4
Available
Evaluation set designed for the use of Internet of Things based on ArduCAM-Mini-2MP and ArduCAM-ESP8266-Nano-V2 modules. ArduCAM-Mini-2MP is a module with a 2 megapixel camera with an OV2640 transducer and an ESP8266 chip. Mounting the M12 lens. ArduCAM B0085
zł234.47
24h
Available quantity: 1
Available
ESP8266 based Arduino board for ArduCAM mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. ArduCAM B0082
zł87.55
4 weeks
No product available!
WiFi module based on ESP8266. It has an embedded antenna and 0.96 "OLED display. The module can be programmed in Lua (under NodeMCU firmware control) or in the Arduino IDE. Provides 12 GPIO lines.
zł55.94
24h
Available quantity: 4
Available
WiFi 802.11 b/g/n module with ESP8266 system, 16 terminals are available with a 2 mm pitch with the possibility of soldering gold pins, there are 9 GPIO lines and 1 ADC line on the connector. Built-in ceramic antenna and U.FL antenna connector. ESP-07
zł11.50
24h
Available quantity: 71
Available
This ESP8266-based development board is designed for rapid IoT application development. It features support for two Grove Plug-n-Play connectors, digital and analog I/O, and UART and I2C interfaces for connecting multiple sensors and modules. The device supports OTA firmware updates, a RESTful API, and integration with mobile apps and IFTTT, allowing for easy remote control and monitoring. Seeed Studio 102110057
zł51.44
24h
Available quantity: 4
Available
Development board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
zł25.31
24h
Available quantity: 16
Available
Wifi module with ESPR8266 ESPRESSIF for communication in the 2.4 GHz band. It is powered by a voltage from 3 V to 3.6 V, available in an SMD enclosure. ESP-WROOM-02
zł15.66
24h
Available quantity: 4
Available
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini
zł19.36
24h
Available quantity: 19
Available
Development board D1 Mini V3 with WiFi module ESP-8266 and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini V3.x
zł18.70
24h
Available quantity: 30
Available
Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series
zł9.21
4 weeks
No product available!
The module is based on the ESP8266MOD chip. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks, which allows for Internet access and data exchange. WeMos D1 Mini Type-C
zł15.62
24h
Available quantity: 57
Available
WiFi 802.11 b/g/n module with ESP8266 system, they have 22 edge terminals with 2 mm raster with the possibility of soldered gold connectors, 9 GPIO lines and 1 ADC line on the connector. Built-in PCB antenna. ESP-12E
zł9.25
24h
Available quantity: 192
Available
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.