![Class A power amplifier 2x45W (TIP41) Class A power amplifier 2x45W (TIP41)](https://kamami.pl/45871-large_default/class-a-power-amplifier-2x45w-tip41.jpg)
![Class A power amplifier 2x45W (TIP41) Class A power amplifier 2x45W (TIP41)](https://kamami.pl/45871-large_default/class-a-power-amplifier-2x45w-tip41.jpg)
zł97.22 tax excl.
Class A power amplifier with two channels, 45 W. Built on the popular J. Hood design from 1969
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Class A power amplifier with two 45 W channels. It is based on TIP41 transistors, based on the popular design by J. Hood from 1969. The components and workmanship ensure good sound quality and stable operation. There are four potentiometers on the board to adjust parameters (including static current) necessary for device calibration. The amplifier is powered with the voltage from 12 to 28 V (the manufacturer recommends powering both channels from one source). Power supply as well as input and output signals are connected to screw terminals.
The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 18 V and has two outputs with a power of 10 W (left and right) and one with a power of 20 W (bass)
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
Stereo audio amplifier based on the TDA7498 chip. It can be powered with the voltage from 20 to 36 V and has two 100 W outputs
No product available!
A module with an active low-pass filter based on NE5532 systems. Dedicated to the bass column (subwoofer)
No product available!
Module with audio amplifier and 8 Ω speaker with a power of 1 W. The board is equipped with a STEMMA connector. Adafruit 3885
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 16 Ω. It is powered with the voltage ranging from 9 to 24 V.
The board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Adafruit 1752
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered from 12 to 26 V and has two 120 W outputs. XH-M543
No product available!
Digital stereo audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 100 W and can work with speakers from 4 to 8 Ω. Powered with voltage from 5 to 24 V. 1002M
A stereo tube preamplifier based on 6K4 tubes. Designed for use with active speakers or an additional amplifier and passive speakers. FX-AUDIO Tube-03
No product available!
Class D mono audio amplifier module with MAX98357 chip. It can work with a 4 to 8 Ω loudspeaker with a power of up to 3 W and communicates via the I2S interface. modMAX98357
No product available!
Stereo audio amplifier with Bluetooth 4.2 communication. It can be powered with the voltage from 19 to 24 V and has two outputs with a power of 80 W
Audio module with DAC and mono amplifier designed to work with TinyPICO and TinyS2. Pimoroni SHIELD-AUDIO-I2S
No product available!
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
2-channel stereo audio mixer module. It has four outputs, on which the summed signal from 2 inputs is available. It is powered with the voltage from 5 to 19 V
Class A power amplifier with two channels, 45 W. Built on the popular J. Hood design from 1969