- New
zł49.30 tax excl.
reSpeaker 2-Mics Pi HAT V2.0 audio expansion board for Raspberry Pi, equipped with two analog microphones and a TLV320AIC3104 stereo audio codec. Supports audio sampling rates from 8kHz to 96kHz, I2S communication and software-based voice activity detection (VAD), direction of arrival detection (DOA) and keyword spotting (KWS). Features three APA102 RGB LEDs, a programmable button, a 3.5mm audio jack, a JST 2.0 speaker connector and two Grove connectors. Compatible with Raspberry Pi 5, 4B, 3B, 3B+, 2B, 1B+ and Zero. Seeed Studio 107100001
The Seeed Studio reSpeaker 2-Mics Pi HAT V2.0 adds audio recording capabilities to Raspberry Pi using two analog microphones and the Texas Instruments TLV320AIC3104 stereo audio codec. The expansion board supports sampling rates from 8kHz to 96kHz, with audio data transmitted through the I2S interface. The module can be used to develop voice assistants, speech-controlled devices, interactive IoT systems and robots.
With suitable software installed, Raspberry Pi can perform voice activity detection (VAD), direction of arrival estimation (DOA) and keyword spotting (KWS). Noise suppression, acoustic echo cancellation and automatic gain control algorithms can also be implemented. The manufacturer specifies a voice capture range of up to approximately 3m, depending on acoustic conditions and system configuration.
The expansion board features three programmable APA102 RGB LEDs, a user button, a 3.5mm audio jack, a JST speaker connector and two Grove connectors. The LEDs and button can indicate application status and control speech recognition functions. The module is compatible with Raspberry Pi 5, 4B, 3B, 3B+, 2B, 1B+ and Zero through the 40-pin GPIO header. Version V2.0 uses the TLV320AIC3104 codec, replacing the WM8960 chip found in the previous hardware revision.
The board measures 65 × 30 × 15mm. Installation requires a driver and Device Tree overlay configured for version V2.0. Connection instructions, setup procedures and audio configuration details are available in the Seeed Studio Wiki documentation.
Manufacturer
Responsible person
Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484
Audio module with two microphones and display designed to work with the Raspberry Pi. Pimoroni PIM524
Audio module with DAC converter and mono amplifier, designed to work with the Raspberry Pi. Pimoroni PIM541
No product available!
Audio module with DAC, line output and display, designed to work with the Raspberry Pi. Pimoroni PIM483
No product available!
The audio module with the PCM5100A DAC converter is designed to work with the Raspberry Pi. Pimoroni PIM542
A module with a stereo DAC converter based on the UDA1334A chip. It can generate a signal with a resolution of 16, 20 or 24 bits. It communicates via the I2S interface. Adafruit 4037
No product available!
Sound card for Raspberry Pi 3 Model B/2B/B+ with PCM5122 chip and IR receiver
An audio module with a DAC converter designed to work with the Raspberry Pi. Supports I2S/DSD/Coaxial input, Analog/Coaxial/Optical/I2S output, and has 384K/32Bit decoding function. DFRobot DFR0941
No product available!
Audio HAT designed for Raspberry Pi computers equipped with a 40-pin GPIO header. Supports 24-bit / 192 kHz stereo audio playback through RCA outputs and a 3.5 mm headphone jack. Features a Texas Instruments PCM5122 digital-to-analog converter. Raspberry Pi DAC+
Raspberry Pi DAC Pro is a high-quality audio HAT with the PCM5242 codec, providing 24-bit 192 kHz resolution and a dedicated headphone amplifier. Raspberry Pi SC0920
No product available!
Sound card for Raspberry Pi with a built-in DAC codec and 2x35W Class D amplifier. Designed for Hi-Fi systems. Raspberry Pi SC2076
Expansion board with XLR connectors. Compatible with the Raspberry Pi DAC Pro converter. Raspberry Pi SC0551
No product available!
The Argon BLSTR DAC kit, designed for the Argon ONE V3 case, is an excellent solution for Raspberry Pi 5 users seeking high-quality audio. Easy to install, featuring the precise PCM5122 DAC chip and ground loop isolator to eliminate noise, this expansion is ideal for music playback systems, home theater setups, and multimedia projects.
The KAmodRPi5 DAC module with PCM5102 chip provides high-quality digital-to-analog audio conversion from I2S signals. Suitable for Raspberry Pi audio projects and as a standalone DAC in systems using I2S audio transmission.
PCM5122 Audio Board (A) is an audio board with a Hi-Fi class DAC designed for Raspberry Pi, offering jack and RCA outputs and support for high-resolution audio. Ideal for building audio systems and multimedia projects based on Raspberry Pi.
No product available!
reSpeaker 2-Mics Pi HAT V2.0 audio expansion board for Raspberry Pi, equipped with two analog microphones and a TLV320AIC3104 stereo audio codec. Supports audio sampling rates from 8kHz to 96kHz, I2S communication and software-based voice activity detection (VAD), direction of arrival detection (DOA) and keyword spotting (KWS). Features three APA102 RGB LEDs, a programmable button, a 3.5mm audio jack, a JST 2.0 speaker connector and two Grove connectors. Compatible with Raspberry Pi 5, 4B, 3B, 3B+, 2B, 1B+ and Zero. Seeed Studio 107100001
reSpeaker 2-Mics Pi HAT V2.0 audio expansion board for Raspberry Pi, equipped with two analog microphones and a TLV320AIC3104 stereo audio codec. Supports audio sampling rates from 8kHz to 96kHz, I2S communication and software-based voice activity detection (VAD), direction of arrival detection (DOA) and keyword spotting (KWS). Features three APA102 RGB LEDs, a programmable button, a 3.5mm audio jack, a JST 2.0 speaker connector and two Grove connectors. Compatible with Raspberry Pi 5, 4B, 3B, 3B+, 2B, 1B+ and Zero. Seeed Studio 107100001