

zł45.50 tax excl.
Bluetooth stereo amplifier module that allows you to play music wirelessly from phones, tablets or computers. It automatically enters pairing mode after the first power supply and then connects to the last paired device, making it easy to use. The set includes 3W speakers with practical JST connectors, and the board is equipped with an integrated LiPo battery charging system, which allows powering from various sources, such as USB-C or battery. Kitronik 2182
The Bluetooth Stereo Amplifier Module allows for wireless music playback from your phone, tablet, or computer. The amplifier board provides excellent sound quality, is lightweight, and does not generate much heat, eliminating the need for a heat sink. This significantly reduces the factors to consider when designing custom enclosures. The user has access to a single on/off switch. The board is equipped with LEDs and sounds that indicate status, such as pairing status. The kit comes with two 3W speakers that have loose wires already connected to them, ending with a very practical JST connector that fits directly into the board. The speaker enclosures measure 67 x 67 mm and have mounting holes in each of the 4 corners. Additionally, the board has 4 mounting holes, allowing for secure attachment of the board in custom-designed enclosures.
The first time the board is powered on, it automatically enters pairing mode and will be visible to nearby compatible devices, appearing as R001. Once the Bluetooth amplifier is paired with a device, it will automatically attempt to reconnect to the last paired device upon the next power-on and will search for a new connection if that fails. To remove the connection between the Bluetooth amplifier kit and the source device, such as a phone, this must be done on the source device.
The stereo amplifier kit can be powered via a USB power supply (with USB-C cable), a LiPo battery (with JST connector), or via USB-C 5V from a computer. It is also equipped with a built-in LiPo battery charging circuit, suitable for various battery capacities, with automatic battery charging and switching between power supply and battery (when a battery is present). The board has a strict power supply voltage range of 3.2V to 5V and indicates low voltage levels to protect the connected LiPo battery from deep discharge. The nominal current draw for the board is approximately 40 mA when the board is on but not playing music and about 410 mA when playing music at maximum volume.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
The USB-C 2.0 Natec Prati cable, 2 meters long, is a universal solution that enables fast and safe charging of devices with up to 100 W power thanks to Power Delivery technology support. Made from durable TPE material, it ensures flexibility, durability, and user convenience, while the included Velcro strap facilitates storage and transport. Natec NKA-2147
Module with an analog sound intensity sensor. It enables measurement in the range from 30 dB to 130 dB with a measurement error of ± 1.5 dB. The module returns the output voltage in the range of 0.6 to 2.6 V. DFRobot SEN0232
No product available!
TDA7297 stereo audio digital amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W
No product available!
Class D PAM8410 class D stereo digital audio amplifier. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W per channel
TPA3110 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W
Module with an AB class amplifier based on the Boomer® LM4853 system. It can work in two modes: mono (power 1.5 W, load 4 Ω) or stereo (power 300 mW, load 8 Ω). It has a potentiometer for power control and gain control for the left and right channel. SparkFun DEV-14475
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
Class A audio amplifier with one channel, 25 W. Built on the popular design of J. Hood from 1969. The set includes 2 pieces
No product available!
The TDA7498 audio amplifier module offers 2x100W power, enabling connection via Bluetooth, TF card and AUX. Powered by 12-24V DC, it is compatible with speakers with a resistance of 4 to 8Ω and is characterized by compact dimensions.
Stereo audio isolator based on two transformers. It allows to eliminate noise in the audio path resulting from different ground resistances of the sound source and the receiver. XH-M372
An audio module with a DAC converter designed to work with the Raspberry Pi. Supports I2S/DSD/Coaxial input, Analog/Coaxial/Optical/I2S output, and has 384K/32Bit decoding function. DFRobot DFR0941
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 16 Ω. It is powered with the voltage ranging from 9 to 24 V.
No product available!
Sound card in the form of an expansion module with a USB adapter designed for NVIDIA Jetson Nano development kits. Waveshare Audio Card for Jetson Nano
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 16 Ω. It is powered with the voltage ranging from 9 to 24 V.
No product available!
The TDA7377 2x35W audio amplifier module is a compact device providing powerful stereo sound with a power of 70W (2x35W per channel). With a wide voltage range, a variety of speaker configurations and compact dimensions, it is an ideal solution for improving sound quality in a variety of audio applications.
No product available!
Audio level indicator module. It is based on the KA2284 chip and has 5 LEDs in yellow, red and green
No product available!
Module with MEMS microphone; model SPW2430 with built-in amplifier. The plate also has a 3.3 V voltage stabilizer needed to power the microphone. Adafruit 2716
Bluetooth stereo amplifier module that allows you to play music wirelessly from phones, tablets or computers. It automatically enters pairing mode after the first power supply and then connects to the last paired device, making it easy to use. The set includes 3W speakers with practical JST connectors, and the board is equipped with an integrated LiPo battery charging system, which allows powering from various sources, such as USB-C or battery. Kitronik 2182