- New
Slot-Type Photo Interrupter Module - KAmod Photo Interrupter Sensor
ID: 1202961
zł10.90
Tax included
zł8.86 tax excl.
IR slot-type photo interrupter module designed for object detection, pulse counting, and incremental encoder applications in automation and robotics projects. The module supports 3.3 V and 5 V platforms, including Arduino, Raspberry Pi Pico, and STM32, while the integrated Schmitt trigger ensures a stable digital output signal. The design includes a 6 mm slot width, a right-angle JST XH-2.5 3-pin connector, and an LED indicating the sensor operating status.
Description
IR slot-type photo interrupter module designed for object detection, pulse counting, and incremental encoder applications in electronics, automation, and robotics projects. The optical sensing element operates in the infrared spectrum, which improves resistance to visible light interference and external disturbances affecting measurement stability. A 6 mm slot allows cooperation with encoder discs, markers, and moving mechanical components passing between the infrared transmitter and receiver. The sensor design supports integration with control systems, positioning mechanisms, and robotic applications requiring precise optical detection and repeatable measurements in motion control systems.
The circuit includes an integrated Schmitt trigger responsible for generating a stable digital output signal without unwanted switching. When the infrared beam is interrupted, the digital output changes to a low state (GND), while the onboard LED indicates the current operating status of the sensor. Compatibility with both 3.3 V and 5 V logic levels allows direct cooperation with platforms such as Arduino, Raspberry Pi Pico, STM32, and other microcontroller systems. The PCB features a right-angle JST XH-2.5 3-pin connector and 3 mm mounting holes for convenient installation in electronic and mechanical assemblies.
Connection diagram
| Sensor module | Platform (e.g. Arduino / RPi Pico) |
|---|---|
| VCC | 3.3V / 5V |
| GND | GND |
| OUT | Digital pin (e.g. D2) |
Features
- IR slot-type photo interrupter
- Slot width: 6 mm
- Integrated Schmitt trigger
- Digital output signal
- Low output state after beam interruption
- LED operating status indicator
- Compatible with 3.3 V and 5 V systems
- Supply voltage: 3.3 - 5 V DC
- JST XH-2.5 3-pin connector
- 3 mm mounting holes
- Dimensions: 26.8 × 15 × 18.7 mm
Kit includes
- KAmod Photo Interrupter Sensor module
- JST XH 2.54 mm to BLT 2.54 mm male cable, 3-pin, 200 mm
1202961
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with a Panasonic sensor with an 8x8 IR thermal matrix (AMG8833 chip) with a built-in 3.3 V controller and a logic level translator. The I2C interface is used for communication. Adafruit 3538
zł228.87
24h
Available quantity: 2
Available
Waveshare Photo Interrupter Sensor is an IR optical sensor module with Schmitt trigger and a signaling diode allowing the construction of an incremental encoder. Waveshare Photo Interrupter Sensor
zł11.72
24h
Available quantity: 12
Available
Module with an infrared sensor AMG8833 - a measurement matrix with a resolution of 64 pixels (8x8). It offers an accuracy of 2.5°C and the ability to detect people at a distance of up to 7 m. Communication with the sensor is via the I2C interface. SparkFun SEN-14607
zł274.11
24h
Available quantity: 1
Available
Adapter dedicated to the FLIR Lepton thermal imaging camera. It has been pre-configured to act as a plug-and-play USB camera UVC 1.0, it can also communicate via UART and I2C interface. SparkFun DEV-14670
zł866.35
3 weeks
No product available!
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 55x35°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14844
zł504.44
3 weeks
No product available!
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 110x75°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14843
zł393.59
3 weeks
No product available!
Module with a thermal imaging camera based on the MLX90640-D55 image sensor. The camera has a resolution of 32x24 pixels and a field of view of 55°. Communication with the module is via the I2C interface. Waveshare MLX90640-D55 Thermal Camera
zł372.70
24h
Available quantity: 3
Available
Module with an infrared sensor AMG8833 (matrix 8x8) designed to measure temperature. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020557
zł238.31
4 weeks
No product available!
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1°C and a viewing angle of 55° x35°. Communication with the sensor takes place via the I2C interface. Pimoroni PIM365
zł415.99
24h
Available quantity: 5
Available
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 55°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4407
zł400.03
24h
Available quantity: 1
Available
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 110°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4469
zł481.09
24h
Available quantity: 1
Available
Module with MLX90641 thermal imaging camera with a 16x12 field matrix and a viewing angle of 55°. It communicates via the I2C interface. Waveshare MLX90641-D55 Thermal Camera
zł245.32
24h
Available quantity: 1
Available
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1°C and a viewing angle of 110°x75°. Communication with the sensor takes place via the I2C interface. Pimoroni PIM366
zł441.95
24h
Available quantity: 1
Available
Lepton 2.5 thermal imaging camera module with an adapter. It allows you to connect the camera to popular development boards, e.g. Arduino or Raspberry Pi. SparkFun KIT-15948
zł2,100.70
3 weeks
No product available!
Lepton 3.5 thermal imaging camera module with PureThermal Mini Pro adapter. It allows you to connect the camera via the USB UVC interface, e.g. to a computer. SparkFun DEV-17544
zł2,271.60
24h
Available quantity: 1
Available
LWIR thermal imaging camera module equipped with a matrix with a resolution of 80x60 pixels with progressive scanning. It offers a viewing angle of 63.5° (diagonal) and 50° (horizontal) and can download data with a frequency of up to 8.6 Hz via the SPI interface. SparkFun SEN-16465
zł1,461.47
3 weeks
No product available!
IR slot-type photo interrupter module designed for object detection, pulse counting, and incremental encoder applications in automation and robotics projects. The module supports 3.3 V and 5 V platforms, including Arduino, Raspberry Pi Pico, and STM32, while the integrated Schmitt trigger ensures a stable digital output signal. The design includes a 6 mm slot width, a right-angle JST XH-2.5 3-pin connector, and an LED indicating the sensor operating status.