• New
Main view
search
  • Main view
  • Rear view
  • Full set
ID: 1202565
zł19.90
Tax included

zł16.18 tax excl.

Dual-channel motor driver module designed for controlling two DC motors or one bipolar stepper motor. The circuit supports motor voltages up to 11 V, works with 3.3 V and 5 V logic systems, and provides output current up to 1.2 A per channel. The design includes dual H-bridges, PWM support, IN / IN and PHASE / ENABLE operating modes, as well as overcurrent and thermal protection. Kamod Motor Driver DRV8835

24h
Available
Available quantity: 150

Description

Dual-channel motor driver module designed for drive systems used in robotics projects, portable devices, electronic toys, and automation applications. The circuit allows control of two DC motors or one bipolar stepper motor using two independent H-bridge channels. The motor supply voltage range is from 0 V to 11 V, while the logic supply voltage range is from 2 V to 7 V, allowing compatibility with both 3.3 V and 5 V platforms, including Arduino, STM32, ESP32, and Raspberry Pi Pico systems.

The driver provides a continuous output current of up to 1.2 A per channel and a peak output current of up to 1.5 A per channel. The module supports IN / IN and PHASE / ENABLE control modes, enabling direction and speed control using PWM signals. The design includes overcurrent and thermal protection to reduce the risk of damage during overload conditions. Compact dimensions of 10 × 15 mm and breadboard-compatible pin spacing simplify integration with small electronic projects and rapid prototyping of motor control systems.

PHASE/ENABLE operating mode

ENABLE PHASE OUT1 OUT2 DC Motor State Description
0 X L L Brake Motor is actively braked
PWM 0 PWM L CW Clockwise rotation (CW)
PWM 1 L PWM CW Counter-clockwise rotation (CCW)
PHASE/ENABLE
IN/IN

IN/IN operating mode

IN1 IN2 OUT1 OUT2 DC Motor State Description
0 0 OFF OFF Coast Both outputs are off
PWM 0 PWM (H/OFF) PWM (L/OFF) CW / Coast Clockwise rotation (CW) at PWM speed
0 PWM PWM (L/OFF) PWM (H/OFF) CCW / Coast Counter-clockwise rotation (CCW) at PWM speed
PWM 1 L PWM (L/H) CW / Brake Brake / Clockwise rotation (CW) at 1 - % PWM speed
1 PWM PWM (L/H) L CCW / Brake Brake / Counter-clockwise rotation (CCW) at 1 - % PWM speed
1 1 L L Brake Motor is actively braked

Features

  • Control of two DC motors or one bipolar stepper motor
  • Two independent H-bridge channels
  • Motor supply voltage: 0 - 11 V
  • Logic supply voltage: 2 - 7 V
  • Compatible with 3.3 V and 5 V systems
  • Continuous output current: 1.2 A per channel
  • Peak output current: 1.5 A per channel
  • Parallel channel connection capability
  • Overcurrent protection
  • Thermal protection
  • IN / IN and PHASE / ENABLE operating modes
  • PWM control support
  • Breadboard-compatible pin spacing
  • Dimensions: 10 × 15 mm

Kit includes

  • Kamod Motor Driver DRV8835 module
  • 2 × straight 6-pin 2.54 mm goldpin headers
1202565

Data sheet

Output current
1,2 A
Number of channels
2
Supply voltage min
0 V
Supply voltages max
11 V

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Other products in the same category (16)