zł49.08 tax excl.
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W6300 Ethernet controller featuring a hardware TCP/IP stack and native IPv4/IPv6 support. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W6300-EVB-Pico2
The WIZnet W6300-EVB-Pico2 development board is designed for projects requiring wired Ethernet communication and the capabilities of the RP2350 microcontroller. The hardware combines a dual-core Arm Cortex-M33 processor running at up to 150 MHz with the W6300 Ethernet controller featuring a hardware TCP/IP stack. The board maintains mechanical compatibility and most of the Raspberry Pi Pico 2 pinout, allowing the use of existing accessories and software libraries. It is equipped with a USB Type-C connector, an RJ45 Ethernet port with an integrated Ethernet PHY, and dual 20-pin GPIO headers.
The W6300 controller processes network protocols in hardware, reducing the workload of the microcontroller during Ethernet communication. It supports TCP, UDP, IPv4, IPv6, ICMPv4, ICMPv6, ARP, IGMP, MLDv1, and PPPoE protocols, provides eight simultaneous hardware sockets, and includes 64 kB of memory dedicated to TX/RX buffers. The integrated 10/100 Mb/s Ethernet interface supports Auto Negotiation, Auto-MDIX, and both Full and Half Duplex operating modes.

The board can be expanded with the optional dedicated WIZPoE-P1 PoE module, enabling power delivery through the Ethernet cable in accordance with the IEEE 802.3af standard.

The RP2350 microcontroller features dual Arm Cortex-M33 cores running at up to 150 MHz, 520 kB of SRAM, and integrated 16 Mbit Flash memory. The device also incorporates advanced security features, including Secure Boot, OTP memory, and Arm TrustZone technology, as well as three Programmable I/O (PIO) blocks, UART, I²C, SPI, PWM interfaces, and a 12-bit ADC. Compatibility with Raspberry Pi Pico 2 simplifies migration of existing projects while allowing the use of compatible expansion boards, software libraries, and development tools.
Data sheet
Manufacturer
Responsible person
This miniature IEEE802.3af-compliant PoE module provides 5V power to devices at up to 8W without the need for a separate power cable. It supports both end-span and mid-span modes, offering high efficiency, electrical isolation, and easy integration into IoT and embedded systems. WIZnet WIZPoE-P1
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero-M
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96-M
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 5302
Mini board with RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Pimoroni SP011
No product available!
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico
No product available!
Development board equipped with RP2040 microcontroller, RGB LED diodes, buzzer and Qwiic/STEMMA QT connectors. Pin spacing compatible with Arduino Nano. Cytron MAKER-NANO-RP2040
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores. The board also has 4 MB of QSPI flash memory. 1.14" LCD module. TTGO T-Display RP2040
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM607
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613
Development board with RP2040 and ESP-12E microcontroller. Equipped with 0.91" OLED display. SB Components 24186
The board with the RP2040 microcontroller, which provides a set of 2x20-pin connectors to which you can connect the HATs of the Raspberry Pi. SB Components 24032
Module with round 1.28" IPS LCD display and 240x240 px resolution and RP2040 chip. SB Components 24018
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W6300 Ethernet controller featuring a hardware TCP/IP stack and native IPv4/IPv6 support. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W6300-EVB-Pico2