SparkFun Pro Micro - board with RP2040 microcontroller
ID: 587426
5906623418183
€16.97
Tax included
€13.79 tax excl.
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288
Description
SparkFun Pro Micro is a board equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0 + cores operating at a frequency of 133 MHz, 256 KB of RAM and 30 GPIO ports. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 16 MB connected via the QSPI interface.
On the board, in addition to the RP2040 system and Flash memory, the user will find a 3.3 V voltage stabilizer, Boot and Reset buttons, power and RGB WS2812 LEDs, a USB type C connector for powering and programming the module, and 20 GPIO outputs with such parameters such as four 12-bit ADC inputs, 10 PWM outputs, I2C interface, SPI and two UART interfaces. The I2C bus is also available on the Qwiic connector.
The platform supports the popular MicroPython and C/C++ programming languages. Programs can be loaded to memory via the USB interface using the built-in UF2 bootloader. The guide with examples of use is available on the product page.
Features
- RP2040 microcontroller designed by Raspberry Pi
- Dual ARM Cortex-M0 + cores clocked up to 133 MHz
- 264 kB of onboard SRAM
- Real Time Clock (RTC)
- AP2112 voltage regulator 3.3 V
- Built-in USB-C connector for programming from USB 1.1, operating in Host and Device modes
- Built-in PTC fuse
- 20 x multi-functional GPIO pins
- 4 x 12-bit ADC inputs with internal temperature sensor, 0.5 MSa/s
- 10 PWM channels
- 2 x UART
- 1 x I2C (with Qwiic)
- 1 x SPI
- Reset and Boot buttons
- Power LEDs and WS2812
- 16 MB external flash memory
- Supported programming languages: MicroPython and C/C++
- Dimensions: 33 x 18 mm
587426
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 16 MB
- Number of I/O
- 20
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 33 m
- Width
- 18 mm
- USB connector type
- USB type C
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
€0.30 24hAvailable quantity: 4626 AvailableCable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
€1.38 24hAvailable quantity: 36 AvailableCable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
€1.39 24hAvailable quantity: 59 AvailableModule with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
€4.65 24hAvailable quantity: 996 AvailableMicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
€18.63 24hAvailable quantity: 2 AvailableThe board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
€30.23 24hAvailable quantity: 3 Available
Other products in the same category (16)
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
€4.80 24hAvailable quantity: 69 AvailableCAN 2.0 and CAN FD module with CAN GD32E103CBT6D controller. Equipped with RP2040 microcontroller. Seeed Studio 102991674
€26.05 Delivery date unknown No product available!
Raspberry Pi Pico W soldered board module dedicated to matrix displays with HUB75 interface. Pimoroni PIM662
€25.73 Delivery date unknown No product available!
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
€33.50 24hAvailable quantity: 25 AvailableThe board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
Regular price€5.52€5.16 24hAvailable quantity: 11 AvailableMechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5100
€46.09 24hAvailable quantity: 2 AvailableDevelopment board with RP2040 and ESP-12E microcontroller. Equipped with 0.91" OLED display. SB Components 24186
€21.54 24hAvailable quantity: 2 AvailableA board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
€29.27 24hAvailable quantity: 5 AvailableRaspberry Pi Pico 2, based on the RP2350 microcontroller, using the application and functional applications of the Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security function, including Arm TrustZone. It is hardware and software with a connected model, which provides an attractive operation for enthusiasts and specialists in systems used
€5.90 24hAvailable quantity: 2061 AvailableModule with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
€5.76 24hAvailable quantity: 190 AvailableModule with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM624
€34.51 24hAvailable quantity: 2 AvailableExpansion module with a Raspberry Pi Pico W board equipped with WiFi communication. The module has a built-in relay, buffer inputs, sink outputs and analog inputs. Perfect for controlling fans, pumps, solenoid valves, large motors, electronic locks or LED lighting. Pimoroni PIM652
€40.73 Delivery date unknown No product available!
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero
€11.41 24hAvailable quantity: 4 AvailableCamera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432
€35.91 24hAvailable quantity: 2 AvailableThe board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
€4.07 24hAvailable quantity: 19 AvailableModule with a round 1.28" IPS LCD display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-LCD-1.28-B
€22.65 24hAvailable quantity: 3 Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288