Best sellers
There are 17521 products.
A set of 8 test clips for Saleae logic analyzers. Saleae Test Clips 8-Pack
Rechargeable NiMH Battery Pack: 6.0 V, 2200 mAh, 3+2 AA Cells, JR Connector
The two-channel signal generator supports a frequency range of up to 60MHz with a variety of waveform types and a precision of up to 0.01uHz. The device is distinguished by 14-bit vertical resolution, stability and an output with an impedance of 50Ω. JDS2900-60
The Step-UpU1V11A Buck Voltage Regulator module with adjustable output voltage 2-5.25V, input voltage range of 0.5-5.5V and a maximum output current of 1.2A. Pololu 2560
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
Kit with 4.2" e-Paper display with passive power supply via NFC, NFC module and microSD card. Waveshare 4.2inch NFC e-Paper Eval Kit
H4 Mini-ITX Kit is a kit that allows the Odroid H4 computer to be mounted in standard mini-ITX cases, providing flexibility in creating compact computer systems. It includes an adapter plate that allows the Odroid H4 to be easily adapted to the mini-ITX format, allowing the use of various cases and power supplies, ideal for industrial applications, home servers or multimedia centers.
Universal oscilloscope probe with BNC plug and 10:1 voltage divider. It has a frequency range of 60 MHz and allows you to perform measurements with a maximum voltage of up to 600 V.
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116
A bistable button with a diameter of 12 mm and a height of 21 mm. Blue colour
Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7
Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599
Starter kit based on ESP32-C3 with an included 1.5-inch OLED display, designed for a quick start with Arduino, MicroPython, and ESP-IDF, supported by educational resources for learning programming and IoT projects. Waveshare ESP32-C3-Zero-Basic-Kit
Switch module with a maximum voltage of 12 V and a current of 10 A based on a MOSFET transistor, controlled by a digital pin. It is equipped with a screw connection and a status LED. SparkFun SPX-19799
The YT-72003 caliper from Yato is a precise and durable measuring tool made of stainless steel. With an accuracy of up to 0.02 mm (0.001 inches) and a clear scale, it ensures easy and accurate readings. It is equipped with measuring surfaces for external, internal, depth, and height measurements. The set includes a handy case that protects the tool and makes it easy to store. YT-72003
Momentary button with a diameter of 12 mm and a height of 21 mm. Blue colour
Pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of 2x20 pin male strips. SB Components 20836
A4990 Dual Motor Driver Carrier
Magnetic cable Akyga AK-USB-47 is a practical tool for charging and data transmission in devices with a micro USB B connector. Thanks to the magnetic mechanism, it ensures convenient handling and effective protection of the socket from dirt and wear. The ability to replace the tip with a different type of connector makes the cable a successful substitute for several different cables, especially when traveling or during everyday use. Ideal for smartphones, tablets, and small consumer electronics.
Kit with 2.13" e-Paper display with passive power supply via NFC, NFC module and microSD card. Waveshare 2.13inch NFC e-Paper Eval Kit