.png)
RP2350 7-inch LCD Development Board 800x480 with touch support - Waveshare 33488
ID: 1202990
5902186335493
zł167.51
Tax included
zł136.19 tax excl.
Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7
Description
Waveshare 33488 is a standalone development board based on the RP2350B microcontroller, equipped with an integrated 7-inch touch LCD display with a resolution of 800 x 480 and a color depth of 65K. The board is intended for embedded projects requiring a local graphical user interface and does not require cooperation with Raspberry Pi or any other single-board computer.
The applied RP2350 microcontroller offers a dual-core and dual-architecture design, enabling operation with ARM Cortex-M33 cores or Hazard3 RISC-V cores, with a clock frequency of up to 150 MHz. The board integrates Flash memory and PSRAM, a TF card slot, and numerous communication interfaces, allowing it to be used in control systems, HMI interfaces, measurement devices, and electronics prototyping.
The RP2350-Touch-LCD-7 version is equipped with a capacitive touch panel supporting up to 5 touch points, communicating via the I2C bus with interrupt support, enabling direct user interaction with the displayed graphical interface.
- RP2350B - dual-core and dual-architecture design, maximum operating frequency up to 150 MHz
- PIO-USB port - USB with device and host support via PIO
- USB Type-C port - for programming, USB 1.1 with device and host support
- UART header
- TF card slot
- 7-inch display panel connector
- Touch panel connector
- Sensor header
- CAN header
- I2C header
- RS485 header
- MX1.25 lithium battery header - for 3.7 V lithium battery, supports charging and discharging, charging current up to 500 mA
- Status indicators - DONE: lithium battery charging complete indicator - CHG: lithium battery charging indicator - PWR: power supply indicator
- CAN termination resistor selection
- RS485 termination resistor selection
- 16 MB Flash memory
- BOOT button - press while resetting to enter download mode
- RESET button
- 2 MB PSRAM
- Debug interface
Features
- Microcontroller
- Chip: RP2350B
- Architecture: dual-core, dual-architecture
- Supported cores: 2 x ARM Cortex-M33 or 2 x Hazard3 RISC-V
- Maximum operating frequency: up to 150 MHz
- On-chip SRAM: 520 kB
- Flash memory: 16 MB
- PSRAM memory: 2 MB
- Display
- Display type: LCD IPS
- Diagonal size: 7 inch
- Resolution: 800 x 480
- Number of colors: 65K
- Viewing angle: up to 170°
- Touch control: capacitive
- Number of touch points: up to 5
- Touch panel interface: I2C
- Touch interrupt support: yes
- Interfaces and communication
- USB: USB 1.1 with device and host support (PIO-USB)
- USB connector: USB Type-C
- Memory card slot: TF
- Communication interfaces: UART, I2C, SPI
- Industrial interfaces: CAN, RS485
- Programmable I/O: 12 PIO state machines
- Power supply
- Battery support: 3.7 V Li-Ion
- Battery connector: MX1.25
- Charging support: yes, up to 500 mA
- Power saving modes: sleep, dormant
- Additional functions
- Built-in temperature sensor
- Accurate timers and clocks
- Drag-and-drop programming via USB
- Supported languages: C/C++, MicroPython, Arduino
- Physical properties
- Product type: standalone development board
- Version: with touch panel
Kit includes
- 1x RP2350-Touch-LCD-7
- 2x HY2.0 2-pin to 2-pin male cable, approx. 10 cm
- 1x HY2.0 3-pin to 3-pin male cable, approx. 10 cm
- 2x HY2.0 4-pin to 4-pin male cable, approx. 10 cm
- 1x Mounting screws pack
1202990
Data sheet
- Microcontroller
- RP2350B
- Flash memory
- 16 MB
- Number of I/O
- 12
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- Yes
- Length
- 110,76 mm
- Width
- 192,96 mm
- USB connector type
- USB type C
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
zł16.90
6 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5128
zł264.54
4 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5100
zł174.96
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
zł23.00
24h
Available quantity: 24
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
zł61.34
24h
Available quantity: 1
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM578
zł66.22
24h
Available quantity: 5
Available
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288
zł70.41
24h
Available quantity: 4
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 60
Available
Game console based on the RP2040 microcontroller from Raspberry Pi. Equipped with a 1.54" LCD display, LiPo battery and aluminum housing. It has API support that allows you to create your own games in C++ and MicroPython. Pimoroni PIM559
zł348.98
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus
zł30.93
24h
Available quantity: 4
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-M
zł33.10
24h
Available quantity: 3
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
zł18.65
24h
Available quantity: 25
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero-M
zł22.28
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96
zł50.81
24h
Available quantity: 4
Available
Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7