Best sellers

Flash eMMC memory module for Odroid C4 computers by Hardkernel. 32GB capacity, Android operating system installed. The kit includes a microSD adapter. Hardkernel 32GB eMMC Module C4 Android

Motor with 25 mm diameter and 69 mm length, 99:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 76 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4867

CS-Mount lens. 25 mm focal length, 14° FoV, manual focus. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN041

Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4845

Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054

Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 220 rpm, torque 1,8kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3053

A set for building an interactive robot based on the micro: bit module. It can be programmed using tools such as Mind+, Scratch, MakeCode and MicroPython. DFRobot MBT0021-EN

C-Mount lens and C-CS adapter. Variable zoom lens 4-12 mm long, FoV 87.2° (H), 39° (H), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN048

CS-Mount lens. 8 mm focal length, 50° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN039

CS-Mount lens. 12 mm focal length, 30° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN040

Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min

Flash eMMC memory module for Odroid C4 computers by Hardkernel. 32GB capacity, Linux operating system installed. The kit includes a microSD adapter. Hardkernel 32GB eMMC Module C4 Linux

Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.

Desktop Kit with Raspberry Pi 4 minicomputer model B 8 GB RAM. In addition to the Raspberry Pi minicomputer, the set includes: an official keyboard and mouse, 5.1 V (3 A power supply), an official case (white-raspberry), two official microHDMI cables, a 16 GB memory card with NOOBS software and a guide.

The multimeter measures inductance, resistance and capacity. Equipped with in diode tester, circuit continuity test and transistor test. Uni-T UT603

Universal multimeter allows you to measure direct and alternating voltage, direct and alternating current, resistance, capacity. Equipped with diode tester, circuit continuity test, automatic circuit breaker. Uni-T UT58A

Digital microscope with 7" LCD display and HDMI output. The microscope is equipped with a 4 MPx image sensor with a magnification factor up to 270 times. Andonstar ADSM407

Digital microscope with 7" LCD display and MicroSD socket. The microscope is equipped with a 2 MPx image sensor with a magnification factor up to 100 times. Andonstar AD207

Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.

Module with SHT35 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020592