Best sellers
There are 15481 products.
The Step-UpU1V10F3 Buck Voltage Regulator module with output voltage 3.3V, input voltage range of 0.5-5.5V and a maximum output current of 1.2A. Pololu 2563
DC motor driver with a working voltage from 5 to 30 V and a maximum continuous current of 13 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MD10C
Metal spatula for spreading a paste or flux. Allows even spreading of the flux.
A module with a 3-channel ADC ADC ADS1015, which allows you to read voltages from -24 V to +24 V with a sampling frequency of up to 3.3 kHz and a resolution of 12 bits. Pimoroni PIM422
Large heat sink in the form of a case covering the entire board. Designed for Raspberry Pi 4 minicomputers. Gray color.
Module with a fan and RGB diode designed to work with the Raspberry Pi. The fan rotation speed can be controlled from the program level. Pimoroni PIM301
Panel thermometer with LCD display with measuring range -50 ~ 100 ° C. 50-301
A needle with a diameter of 1 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
Two-channel DC motor driver with an operating voltage from 7 to 35 V and a maximum continuous current of 30 A. It can be controlled by an analog signal, PWM, UART, RC signal or by means of built-in buttons. Cytron MDDS30
SparkFun Qwiic Button Breakout is a configurable button module for projects using the Qwiic environment. Has a built-in LED. It allows soldering the 12 mm button with the lighting color chosen by the designer. SparkFun BOB-15931
Tip GD-3 No. 056 mounted on the heater. Suitable for all types of Elwik soldering irons.
BNC connector cable (adapter) to the "Alligator clip" connector. It allows you to conveniently connect the device, e.g. to an oscilloscope. Digilent (240-134)
A module with a set of environmental sensors (pressure, temperature and humidity sensor, light sensor, MEMS microphone) designed for micro:bit. Pimoroni PIM355
Compact programmer module for STM32 microcontrollers for soldering into a board. Supports JTAG/SWD interfaces. STLINK-V3SET has a virtual COM port and interfaces SPI, I2C, CAN, GPIO for programming via bootloader. STMicroelectronics STLINK-V3MODS
The 13.3-inch Iaves from Waveshare for Raspberry Pi features a high resolution of 1920 x 1080 pixels, reinforced class cover, HDMI interface and USB touch panel. It supports many mini-PCs and many systems
Digital microscope with 5" LCD display and HDMI output. The microscope is equipped with a 3MPx image sensor with a magnification factor up to 260 times. Andonstar ADSM301
16 Mbit, low voltage, Page-Erasable Serial Flash memory with byte alterability and a 50 MHz SPI bus interface, STM, SO8, RoHS