STLINK-V3MODS - Programmer module for STM32 microcontrollers
ID: 578638
5906623436408
zł42.39
Tax included
zł34.46 tax excl.
Compact programmer module for STM32 microcontrollers for soldering into a board. Supports JTAG/SWD interfaces. STLINK-V3SET has a virtual COM port and interfaces SPI, I2C, CAN, GPIO for programming via bootloader. STMicroelectronics STLINK-V3MODS
Description
Compact programmer module for STM32 microcontrollers for soldering into a board. Supports JTAG/SWD interfaces. It has a virtual COM port, which allows communication with the microcontroller via the UART interface or via bridge interfaces (SPI, I2C, CAN, GPIO), which allows programming using the bootloader.
STLINK-V3SET works with the STM32Cube program and with development environments such as Keil MDK-ARM, IAR EWARM and environments based on the GCC compiler. ST also allows access to the low level API interface of the programmer.
Features
- Modular probe with small size: approximately 15 x 30 mm
- Direct-to-PCB implementation by 2 x 16-pin 1.27 mm edge castellated vias, with all signals available in required minimum PCB surface
- Self-powered through a USB connector (Micro-B)
- USB 2.0 high-speed compatible interface
- Direct firmware update support (DFU)
- JTAG / serial wire debugging (SWD) specific features:
- 3 V to 3.6 V application voltage support and 5 V tolerant inputs
- JTAG communication support
- SWD and serial wire viewer (SWV) communication support
- Virtual COM port (VCP) specific features:
- 3 V to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs
- VCP frequency up to 15 MHz
- Multi-path bridge USB to SPI/UART/I2C/CAN/GPIOs specific features:
- 3 V to 3.6 V application voltage support and 5 V tolerant inputs
- Drag-and-drop Flash programming
- Two color LEDs: communication, power
578638
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board
zł172.00
24h
Available quantity: 42
Available
Cable with USB type A and USB type C 2.0 plugs, cable length 1 m
zł4.37
24h
Available quantity: 16
Available
Cable USB type C (m) / USB type A (m) magnetic ver. 2.0 2.0m. Akyga AK-USB-43
zł28.25
24h
Available quantity: 1
Available
A tool for debugging and programming STM32 microcontrollers via JTAG/SWD interfaces. It has a built-in current measurement unit (SMU) designed to optimise power consumption. STMicroelectronics STLINK-V3PWR
zł492.64
Delivery date unknown
No product available!
Other products in the same category (16)
Adapter with galvanic isolation for STLINK-V3SET. It also allows the programmer to work with systems powered with voltages below 3.3 V. STMicroelectronics B-STLINK-ISOL
zł195.61
24h
Available quantity: 2
Available
A tool for programming and debugging applications for systems with the ARM Cortex-M and ARM Cortex-A core. It uses an embedded GDB server that is emulated via USB. Adafruit 3839
zł552.41
4 weeks
No product available!
10-wire ribbon cable (1.27mm to 2.54mm) for Segger J-Link EDU mini
zł34.42
24h
Available quantity: 242
Available
JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes. J-link PLUS Compact (8.19.28)
zł3,125.17
24h
Available quantity: 3
Available
JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
zł3,119.78
24h
Available quantity: 5
Available
Versatile, low-cost debugger and programmer for 8-bit and 32-bit microcontrollers
zł679.01
24h
Available quantity: 3
Available
Mini ST-LINK/V2, in-circuit debugger/programmer for STM8 and STM32
zł39.18
24h
Available quantity: 50
Available
An adapter dedicated to programming STM32 microcontrollers in QFP100 chassis. It has a 20-pin JTAG/SWD connector and/or a 4-pin USART1 interface for programming and testing. Waveshare STM32-QFP100
zł355.27
24h
Available quantity: 1
Available
Compact tool for debugging and programming STM32 microcontrollers via JTAG / SWD interfaces. STMicroelectronics STLINK-V3MINIE
zł63.79
24h
Available quantity: 57
Available
Hi-Speed JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
zł4,099.82
1 weeks
No product available!
A tool for debugging and programming STM32 microcontrollers via JTAG/SWD interfaces. It has a built-in current measurement unit (SMU) designed to optimise power consumption. STMicroelectronics STLINK-V3PWR
zł492.64
1 weeks
No product available!
Hi-Speed JTAG/SWD Emulator with USB and Ethernet interface, Segger
zł5,221.25
24h
Available quantity: 3
Available
JTAG / SWD programmer-debugger with USB and WiFi interface. It supports microcontrollers and microprocessors with Cortex-M, Cortex-A, Cortex-R and ARM7, ARM9 and ARM11 cores of most manufacturers as well as 8051, RISC-V, PIC32, RX. Segger J-Link WiFi (8.14.28)
zł5,180.26
24h
Available quantity: 2
Available
JTAG interface for microcontrollers with ARM core
zł42.39
24h
Available quantity: 27
Available
A new programmer-debugger with the USB interface. It supports the STM32 microcontrollers via SWD interface. ZL30PRGv2-1 is compatible with the STMicroelectronics ST-Link/V2-1. It also has the function of USB-UART converter, thanks to which it can successfully replace the KAmodRS module.
zł79.00
24h
Available quantity: 236
Available
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board
zł172.00
24h
Available quantity: 42
Available
Compact programmer module for STM32 microcontrollers for soldering into a board. Supports JTAG/SWD interfaces. STLINK-V3SET has a virtual COM port and interfaces SPI, I2C, CAN, GPIO for programming via bootloader. STMicroelectronics STLINK-V3MODS