Best sellers

The clamp meter measures DC voltage, AC voltage, AC voltage, and resistance. Equipped with diode test, circuit continuity test and backlight. Uni-T UT200A

Evaluation kit equipped with Xilinx Artix 7 XC7A35T-1C FPGA chip and 256 MB DDR3 RAM. The kit is supported by Vivado and the Verilog and Lucid languages. SparkFun DEV-16527

Industrial module with 8 relays and 8 digital inputs. It communicates via the RS485 interface and supports communication using the Modbus RTU protocol. Waveshare Modbus RTU Relay (D)

Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476

32-channel logic analyzer with a sampling frequency of 500 MHz. It can decode data under most popular communication protocols. Works with Windows, Linux and Mac OS systems. LA5032

PoE power module designed for Raspberry Pi 5. It allows you to use the PoE interface to power the Raspberry Pi via an Ethernet cable, eliminating the need to use a separate power supply. Waveshare PoE HAT (F)

The module is equipped with an AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface.

5 MP camera with OV5640 sensor and 180° wide-angle lens. OV5640-A28

USB flash drive for security testing using the key injection method. It is highly effective in system penetration, can simulate keyboard operation and enables hotplug attacks. Hook5 USB RUBBER DUCKY

Miniature peristaltic pump powered with the voltage from 6 to 12V. Made of durable materials, ensures long operation with low noise level.

A small minicomputer with a RockChip RK3328 quad-core SoC chip (ARM Cortex-A53). The computer is equipped with 2 GB DDR4 RAM, Gigabit Ethernet port and USB 3.0. Each module has its own unique MAC address. NanoPi NEO3 2GB

Precision Phillips screwdriver 1 x 50 mm - YT-25838

The 40 cm RP-SMA (female) to uFL/u.FL RF adapter cable is ideal for connecting radio modules, routers and antennas, providing a reliable connection of high-frequency signals in applications such as Wi-Fi, Bluetooth and IoT. Thanks to its solid construction and flexible 1.13 mm diameter cable, it is damage-resistant and easy to install, even in hard-to-reach places.

NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S

SIM800L V2.0 module with support for four-band GSM/GPRS network. Module controlled by AT commands.

A set of two Pololu wheels with dimensions 60x8mm in white. Intended for Micro servos with 4.8mm diameter spline and 20 teeth. Pololu 4914

A set of two Pololu wheels with dimensions 40x7mm in black. Intended for Micro servos with 4.8mm diameter spline and 20 teeth. Pololu 4905

The plow is intended for use with the Zumo 32U4 robot. The plow is made of thick, laser cut stainless steel and is supplied with a plastic handle for the sensor plate. Pololu 3121

Heart rate monitor module based on the popular MAX30101 chip. The board is equipped with connectors compliant with the Qwiic standard. SparkFun SEN-16474

8-channel I2C expander module based on the TCA9548A system. The module has Qwiic connectors and allows communication with many I2C devices that have the same address. Sparkfun BOB-16784