Best sellers

Module with LCD IPS 0.96" display with a resolution of 80x160 px. It communicates via the SPI interface. ModIPSdisp0.96"

Module with 13 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4153

Display 7 "1024x600 IPS compatible with LattePanda V1.0 mini computer. Display powered from LattePanda, no additional power supply needed DFRobot FIT0477

Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005

A small LCD panel with the ability to control its transparency. The panel can block up to about 95% of light. Adafruit 3627

Motor with 37 mm diameter and 65 mm length, 10:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 1000 RPM speed, 4,9 maximum torque and 64 CPR encoder. Pololu 4758

Photoelectric liquid level sensor FS-IR02 in a set with a Gravity adapter. DFRobot SEN0205

Adapter with Grove connector to DMX512 connector (EIA-485 standard). The module is based on the SN75176 converter system. Seeed Studio 103020000

Waterproof momentary button with a diameter of 12 mm and a height of 21 mm in a stainless steel housing. Yellow color

The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.

Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g

The S9V11F3S5C3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has fixed 3.3 V low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.

IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. Designed for surface mounting. Seeed Studio 317990687

DisplayPort cable version 1.4 terminated on both sides with a plug. 2m length, black cable. Logilink CV0120

Bluetooth 4.0 dongle as a USB adapter. Works with bluetooth devices such as speakers, headsets, smartphones, tablets, keyboards, mice, printers, projectors etc.

Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600

Lens with M12 mount and IR filter. It has a focal length of 2.3 mm and a FoV 170°/120°/80°. ArduCAM LN017

The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027

Easy PET-G filament in black with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Black

LT86104SX is an integrated circuit designed to distribute a digital HDMI or DVI signal from a single input to four outputs. The device is used in multimedia equipment, video distribution systems and AV installations requiring simultaneous signal transmission to multiple displays.