Best sellers

Universal multimeter allows you to measure direct and alternating voltage, direct and alternating current, resistance, capacity. Equipped with diode tester, circuit continuity test, automatic circuit breaker. Uni-T UT58A

Double comparator with low power consumption in the TSSOP-8 housing. STMicroelectronics LM2903YPT

Digital microscope with 7" LCD display and HDMI output. The microscope is equipped with a 4 MPx image sensor with a magnification factor up to 270 times. Andonstar ADSM407

Digital microscope with 7" LCD display and MicroSD socket. The microscope is equipped with a 2 MPx image sensor with a magnification factor up to 100 times. Andonstar AD207

TS331ILT, Micropower low-voltage, rail-to-rail comparators, SOT-23-5

A set of 8 test clips for Saleae logic analyzers. Saleae Test Clips 8-Pack

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm and 22AWG intended for logic analyzers Saleae

Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979

Motor with 37 mm diameter and 54 mm length, 70:1 metal gear, 24 V operating voltage, 0,1 A to 3 A power consumption, 140 RPM speed and 31 maximum torque. Pololu 4684

Shield designed for IoT applications with LTE CAT M1/NB-IoT SARA-R4 modem. The board is compatible with Arduino, allows you to add communication via cellular networks to Arduino boards. SparkFun CEL-14997

E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 13339

Mini SPDT type end switch with lever length 13.5mm and current capacity of 1A contacts. Pololu 1528

A set of ferrules terminals. The box contains 840 connectors in three colors: red, green and yellow. Connectors are designed for wires from 10 to 20 AWG.

Small size driver module TB67S279FTG stepper motor powered with 10 ... 47V voltage and working current 1.1A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Module with soldered connectors. Polol 3099

Development board with ST Zio and ST morpho connectors, based on the STM32L552ZE microcontroller. Thanks to the built-in programmer compatible with ST-Link/v2-1, it is possible to program and debug the microcontroller via the USB connector. STMicroelectronics NUCLEO-L552ZE-P-Q

Motor with 25 mm diameter and 69 mm length, 99:1 metal gear, 12 V operating voltage, 0,2 A to 2,1 A power consumption, 76 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4867

C-Mount lens and C-CS adapter. Variable zoom lens 4-12 mm long, FoV 87.2° (H), 39° (H), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN048

Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4845

Audio extension module for Raspberry Pi 3 Model B / 2B / B + / A + / Zero W with PCM5122 chip and an IR receiver TSOP34838.

Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054