2.9" Tri-Color E-Ink e-Paper Display Module 296x128px - Waveshare 13339
ID: 573351
5906623424269
zł66.78
Tax included
zł54.29 tax excl.
E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 13339
Description
Display module made in E-Ink technology (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128. The module has a built-in controller communicating via the SPI interface, enabling the display of the image in three colors: red, black and white. The display's power supply is only necessary to change the screen content, refresh it, ideally suited to applications that require a long battery life, additionally the display has a large viewing angle, above 170 °, which makes it ideal it is suitable for industrial applications in control and measurement devices with slow changes in the value of the measured quantity.
Features
- The display does not have a backlight so that the image stays on for a long time after turning off the power
- Very low power consumption, energy is only needed to refresh the screen content
- Extensive development support, user manual, programming resources in the form of a driver board diagram, examples on Raspberry Pi , Arduino and STM32
properties
- Diagonal: 2.9 inches
- Resolution: 296 x 128 pixels
- Spot size: 0.138 mm x 0.138 mm
- Communication interface: SPI (3 and 4 wire)
- Display colors: red, black, white
- Gray scale: 2
- Viewing angles:> 170 °
- Refresh time of the entire screen: 15 seconds
- The power needed to refresh the screen: 30 mW (typical)
- Power in standby mode: <0.017 mW
- Operating voltage: 3.3 V
- The size of the displayed image: 66.89 x 29.05 mm
- External dimensions: 89.5 x 38 mm
573351
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,9
- Resolution
- 296 x 128 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with E-Ink display with a resolution of 250x122 pixels and a diagonal of 2.13 inches. Designed for the Raspberry Pi computer (HAT overlay). SPI interface communication. Waveshare 2.13inch e-Paper HAT
zł67.48
24h
Available quantity: 4
Available
E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 12956
zł58.78
24h
Available quantity: 13
Available
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller
zł53.82
24h
Available quantity: 1
Available
Other products in the same category (16)
2.9" e-Paper display with a resolution of 296 x 128 px, supporting red, yellow, black, and white colors, featuring an SPI interface and very low power consumption. Includes a driver board. Waveshare 2.9inch e-Paper Module (G)
zł61.94
24h
Available quantity: 4
Available
Full-color 3.6 inch e-Paper display based on E Ink Spectra 6 technology with a resolution of 600x400 pixels, SPI communication, supplied in a version without a driver board. Waveshare 3.6inch e-Paper (E)
zł150.52
6 weeks
No product available!
2.9" e-Paper display with 296x128 px resolution, Red/Yellow/Black/White colors, 3-wire and 4-wire SPI interface, 3.3 V operating voltage, passively reflective without backlight, ultra-low power consumption. Waveshare 2.9inch e-Paper (G)
zł46.20
6 weeks
No product available!
The 7.5-inch eInk/ePaper display features 800x480 pixel resolution for excellent readability, even in bright sunlight. It supports three colors: black, white, and red, allowing you to clearly highlight key information. The image persists without power, making the display ideal for battery-powered applications. Adafruit 6415
zł313.56
24h
Available quantity: 1
Available
A 3.52-inch eInk/ePaper display with a resolution of 340 x 180 pixels, offering support for four colors: black, white, red, and yellow. The image remains visible without power, and the high contrast ensures excellent readability in full daylight. The display is designed for standalone integration with an external controller via a 24-pin FPC connector and is supported by popular Arduino and CircuitPython libraries. Adafruit 6414
zł101.20
24h
Available quantity: 1
Available
3.6-inch full-color e-Paper display based on E Ink Spectra 6 technology with 600x400 resolution, equipped with an HAT+ driver board featuring SPI interface and a 40-pin GPIO connector for Raspberry Pi. Waveshare 3.6inch e-Paper HAT+ (E)
zł193.86
6 weeks
No product available!
E-Ink e-paper display with a 5.83inch diagonal and 648x480 resolution, supporting four colors: red, yellow, black, and white, designed for ultra-low-power applications using an SPI interface. Waveshare 5.83inch e-Paper (G)
zł156.85
6 weeks
No product available!
E-Ink e-paper display with a 5.83 inch diagonal and 648 x 480 resolution, supporting four colors: red, yellow, black, and white, equipped with an e-Paper Driver HAT using an SPI interface, designed for ultra-low power applications. Waveshare 5.83inch e-Paper HAT (G)
zł186.96
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, featuring a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 pixels, enclosed in an elegant solid wood frame. The device offers ultra-low power consumption, Wi-Fi and Bluetooth connectivity, AIoT capabilities, voice interaction, and photo and information display, making it ideal for decorative and informational applications. ESP32-S3-PhotoPainter (no BAT)
zł347.29
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, equipped with a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 px, enclosed in an elegant solid wood frame. Support for Wi-Fi, Bluetooth, AIoT, and voice interaction, combined with ultra-low power consumption and the option of powering from a 3.7 V lithium battery, makes it suitable for decorative and informational applications. Waveshare ESP32-S3-PhotoPainter
zł346.71
6 weeks
No product available!
An HMI device with a 7.5-inch ePaper display with a resolution of 800x480 pixels, designed for creating energy-efficient devices and information panels. The built-in ESP32-S3 with 8 MB of PSRAM, Wi-Fi and Bluetooth connectivity, and support for platforms such as SenseCraft HMI, ESPHome, and Arduino facilitate integration with IoT systems. The device includes temperature and humidity sensors and a 2000 mAh battery, providing up to 3 months of operation in power-saving mode. Seeed Studio 100073581
zł353.43
24h
Available quantity: 1
Available
An HMI device with a 7.3-inch, color ePaper E Ink Spectra 6 display with a resolution of 800 x 480 pixels, ideal for dashboards and data visualization. The built-in ESP32-S3 microcontroller with 8 MB of RAM, along with Wi-Fi and Bluetooth connectivity, enables easy integration with IoT systems and platforms such as SenseCraft HMI, Home Assistant, and Arduino. The device includes temperature and humidity sensors and a 2000 mAh battery, providing up to 3 months of operation in power-saving mode. Seeed Studio 100017057
zł475.32
4 weeks
No product available!
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and Basic Kit set (3.7 V lithium battery + 16 GB TF card + card reader) – development board with built-in RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97-Kit
zł203.27
6 weeks
No product available!
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 – development board with built-in RTC, IMU, temperature and humidity sensor, and AI voice interaction support (without battery). Waveshare ESP32-S3-ePaper-3.97-EN
zł167.03
6 weeks
No product available!
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and 3.7 V battery supply – development board with integrated RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97
zł173.09
6 weeks
No product available!
A 13.3-inch color ePaper display powered by E Ink Spectra™ 6 technology, providing excellent readability and low power consumption. The device is equipped with an ESP32-S3 processor, Wi-Fi and Bluetooth connectivity, and a built-in 5000 mAh battery that provides up to 6 months of operation on a single charge. Thanks to the SenseCraft HMI platform, it allows for quick content creation and remote updating without programming. SeeedStudio 100064156
zł1,369.33
4 weeks
No product available!
E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 13339