Best sellers

STM32G051K8T6, 32-bit STM32G0 family microcontroller, Arm Cortex-M0+ core, 64 MHz, 64 KB of Flash memory, 18 KB of RAM, LQFP32

SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM and 8 GB eMMC. Raspberry Pi CM4002008

IDC male socket, 10-pin straight, pitch 1.27 mm. Designed for mounting on printed circuit boards. RoHS

Two 0.7 mm precision sockets. Dedicated to a universal multimeter

Segmented LED display that allows you to display four digits consisting of 7 segments and a dot. Additionally, it can display a colon. The color of the displayed digits is red, common anode

Sthor brand extension cord with grounded sockets, child protection, power cut-off switch, solid three-core 1.5 mm² cable with a PVC sheath, and a high-quality plastic housing with mounting holes, suitable for home and office use, easily powering demanding receivers, with a maximum load of 3500 W, three sockets and a length of 1.5 m. Sthor-72350

Universal test probes for multimeters. The kit includes two probes (without wires) in red and black

Sthor brand extension cord with grounded sockets, child protection, power cut-off switch, solid three-wire cable with a cross-section of 1.5 mm² in a PVC sheath, allows you to power demanding receivers at home and in the office, with a plastic housing, mounting holes , rated voltage 230V/50Hz, maximum load 3500W, five sockets, length 5m and blue switch illumination. Sthor-72358

SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM, 8 GB eMMC and wireless connectivity. Raspberry Pi CM4102008

Sthor brand extension cord with anti-overvoltage and overload protection, grounded sockets, child protection, power cut-off switch, solid three-wire cable with a cross-section of 1.5 mm², plastic casing, allows you to power and protect devices at home and in the office, with maximum load 3500 W and thermal protection 16A/250V. Sthor-72371

BMS module for three Li-Ion cells with a voltage of 11.1 V. It has the function of charging with a balancer, discharging and over-discharge protection. The cells can be charged with a continuous current of up to 12 A

Differential pressure sensor 0 - 10 kPa, 5%, 5V, housing 867C-05, Freescale, RoHS

The protection system for four Li-Ion cells with a voltage of 14.8 V. The module has the function of charging the cells, discharging and protecting against excessive discharge. The cells can be discharged with a continuous current of up to 18 A

Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell