Best sellers
There are 17322 products.
KAmodDIGIpot is a miniature digital potentiometer module. It allows, by means of two PU / PD inputs, to change the resistance value between the outputs A, W, B (compatible with the outputs of the analog potentiometer), using buttons or outputs of the microcontroller. Adjustment in 32 steps, value 10k.
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Version with soldered connectors. Raspberry Pi SC0919
KAmod Multiplexer features the CD4051 chip, which is an analog 8-channel multiplexer/demultiplexer. The chip can handle analog signals with an amplitude of up to 20 VPP and provides low on-state resistance. The active channel is selected through a sequence of states on three digital inputs
Neodymium rectangular magnet with dimensions of 40x5mm a and a height of 5 mm.
AB type flexible cable (tape), 15 cm long. The tape has 50 wires and a pitch of 0.5 mm
The 4 mm red female banana connector is a universal electronic connector that provides a secure and quick connection in measuring and test devices
74LVC2G125DC,125 is an energy-efficient, high-speed logic buffer with two channels and 3-state outputs, designed for isolating or amplifying digital signals in embedded systems, automation, and applications with mixed logic level interfaces.
The KAmod RPI5-Proto universal board is an accessory designed for the Raspberry Pi 5, offering a grid of metalized holes in a 2.54 mm pitch and GPIO pins and I2C, SPI and UART interfaces, which makes it easy to create simple electronic circuits
Popular 2.1 / 5.5 mm power connector for threaded mounting.
Neodymium rectangular magnet with dimensions of 20x10mm a and a height of 5 mm.
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXB0108 chip.
RJ45 female-female connector. It allows a quick connection of two Ethernet cables
KA-LOGO! -IO-Simulator is a simulation set for the Siemens LOGO logic controller! 8. Using this set, it is possible to simulate individual bits at the controller inputs as well as using the ADC converter embedded in the controller. In addition, the module with LEDs allows signaling of states on four outputs of the logic controller
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Akyga AK-USB-03 is a 1.8-meter USB 2.0 cable that allows you to connect devices with USB A and USB mini-B 5-pin ports. It is ideal for charging and data transfer between various devices, such as cameras, smartphones or camcorders, and a computer or other devices equipped with appropriate USB connectors. Akyga AK-USB-03
Extruded aluminium heatsink with pins, dedicated to SLC5 single board computer (TitanSBC-8Mmini). Thermal resistance 15.2K/W, maximum dissipation loss 4.2W
KAmod I2C-Mini Out8 enables easy expansion of microprocessor systems with eight switching outputs for voltages and currents typical of low-voltage load control. Compatibility with the I2C bus and the ability to connect up to 8 modules in a single network make it an ideal solution for automation systems, lighting and power control, and other applications requiring flexible control of multiple circuits.