KAmod I2C-Mini Out8 – 8-Channel Low-Power Output Expander via I2C with MCP23008 Chip
ID: 1195586
5902186302525
zł18.86
Tax included
zł15.33 tax excl.
KAmod I2C-Mini Out8 enables easy expansion of microprocessor systems with eight switching outputs for voltages and currents typical of low-voltage load control. Compatibility with the I2C bus and the ability to connect up to 8 modules in a single network make it an ideal solution for automation systems, lighting and power control, and other applications requiring flexible control of multiple circuits.
Description
KAmod I2C-Mini Out8 is a compact expansion module that increases the number of digital outputs in microcontroller systems via the I2C bus. It features eight independent outputs based on N-MOSFET transistors, each capable of handling up to 1 A and 50 V, configured as open-drain outputs. With the MCP23008 I/O expander, each output can be individually controlled. The module allows separate power supplies for the logic and load sections, enhancing flexibility in automation and control applications.
Features
- 8 open-drain outputs (active low to GND)
- Maximum load voltage: 50 V
- Maximum output current: 1 A per channel
- Protection diodes for inductive loads (relays, valves, motors)
- MCP23008 I/O expander with I2C interface
- I2C bus speed: up to 1 MHz
- Configurable I2C address (3 address lines, 8 address options)
- Logic section supply voltage: 3...5 V
- Load section supply voltage: 3...50 V
- Dimensions: 23,4 x 31 mm
1195586
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with 16-channel IO expander MCP23017 controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5346
zł33.41
24h
Available quantity: 9
Available
32-channel IO expander with 14 analog inputs. The board communicates via the Ethernet interface. Numato Lab GPETH320001
zł419.13
24h
Available quantity: 3
Available
The KAmodPCAL6408 is an 8-bit I/O expander with the PCAL6408A chip by NXP, controlled by the I2C interface.
zł16.90
24h
Available quantity: 406
Available
Module with 4 digital inputs and 4 digital outputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. MA01-AXCX4040
zł99.97
24h
Available quantity: 3
Available
8-channel IO expander with 6 analog inputs with 10-bit resolution. Communicates via USB interface. It has compact dimensions, making it suitable for small devices. Numato Lab GP80002-B
zł259.00
3 weeks
No product available!
8-channel I2C expander module based on the TCA9548A system. The module has Qwiic connectors and allows communication with many I2C devices that have the same address. Sparkfun BOB-16784
zł70.31
24h
Available quantity: 1
Available
DFRobot DFR1193 module with the LTC4316 chip enables the simultaneous use of multiple identical I2C sensors without address conflicts. It supports quick configuration via DIP switches or resistors, offering a flexible and reliable solution for IoT, robotics, and automation projects.
zł28.83
24h
Available quantity: 4
Available
Module with three voltage analog outputs ranging from 0 to 10 V. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3079ADAM
zł292.24
24h
Available quantity: 5
Available
Module with analog output 0-20 mA or 4-20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3076ADAM
Regular pricezł285.54zł204.52
24h
Available quantity: 3
Available
16-channel GPIO expander with an I2C interface microcontroller can interface with 16 fully configurable digital input/output pins. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. With a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix. BOB-13601
zł41.84
3 weeks
No product available!
Micro:Mate is an expansion board for the micro: bit development module. It provides six 3-pin connectors with I/O outputs, a 3.5mm audio jack connector and is powered from a 5V microUSB connector. DFRobot DFR0518
zł30.90
4 weeks
No product available!
Module with 8 digital inputs and 8 digital outputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8028ADAM
zł201.02
24h
Available quantity: 1
Available
I2C bus amplifier module based on the LTC4311 system. It enables communication via a popular interface over much longer distances while maintaining high transmission speeds. Adafruit 4756
zł36.86
4 weeks
No product available!
I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. Adafruit 2717
zł35.03
4 weeks
No product available!
The KAmod I2C-IOexp16 module is an extension equipped with 16 programmable digital lines (inputs or outputs), based on the MCP23017 system and controlled via the I2C bus with the possibility of connecting up to 8 modules thanks to addressing. The module works with a voltage from 2 to 5 V, has an interrupt output and allows for a current flow of up to 20 mA on each line
zł18.91
24h
Available quantity: 17
Available
Module with 8 inputs for data acquisition from DS18B20 temperature sensors. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3066ADAM
zł212.73
24h
Available quantity: 1
Available
KAmod I2C-Mini Out8 enables easy expansion of microprocessor systems with eight switching outputs for voltages and currents typical of low-voltage load control. Compatibility with the I2C bus and the ability to connect up to 8 modules in a single network make it an ideal solution for automation systems, lighting and power control, and other applications requiring flexible control of multiple circuits.