Best sellers

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM333

Adapter with RPi CM4 socket and CM3 SODIMM connector. It allows you to connect the Raspberry Pi Compute Module 4 minicomputer to the base boards dedicated to CM3 modules. Waveshare Zero-to-CM3-Adapter

Audio module with two microphones and display designed to work with the Raspberry Pi. Pimoroni PIM524

Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000

The module with 6 capacitive touch buttons and LED diodes, designed to work with the Raspberry Pi. The buttons are connected to the minicomputer via the CAP1166 controller, which communicates via the I2C interface. Pimoroni PIM272

Module with a temperature and humidity sensor DHT22. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80℃. DFRobot SEN0137

Module with an analog MQ8 hydrogen sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0133

Module with an analog MQ4 methane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0129

Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with a place for a fan. Hardkernel ODROID-H3 Case Type 2

Keyboard module with five colored buttons. The board is equipped with a Gravity connector and has an analog output. Powered with the voltage of 3.3 V or 5 V. DFRobot DFR0075

The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065

Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with a slot for a network card and two slots for a 2.5" SATA drive. Hardkernel ODROID-H3 Case Type 7

Module with color sensor TCS3472. The board communicates via the I2C interface. Waveshare TCS34725 Color Sensor

The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard

Cap for Xbee and Arduino. It has been designed for wireless sensor networks such as WiFi, Bluetooth 2.0 / 4.0 and Zigbee. DFRobot DFR0015

Module with 5x5 RGB LED matrix display (25 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM435

White PLA Mineral filament with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy PLA Mineral White

Natural PLA Mineral filament with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy PLA Mineral Natural

Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635

Module with IO expander equipped with 14 inputs/outputs, including 8 connected to the ADC converter and 6 to PWM outputs. It communicates via the I2C interface and is compatible with the Raspberry Pi. Pimoroni PIM517