Best sellers

Akyga AK-CA-86 is a compact SATA/USB 3.0 adapter that facilitates fast and convenient connection of 2.5" drives to a computer. With support for external power and Plug and Play functionality, it is suitable for both service and home applications. This practical data-handling tool is ideal for users seeking a mobile and functional solution.

This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.

E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 13339

Tiny (18 x 44 mm) breadboard-friendly development board, easy to use, hacker friendly. ATmega328 brains32KB of flash (1/2 K is reserved for the bootloader), 2KB of RAM, clocked at 16MHz. Adafruit 2590

Magnetic cable Akyga AK-USB-47 is a practical tool for charging and data transmission in devices with a micro USB B connector. Thanks to the magnetic mechanism, it ensures convenient handling and effective protection of the socket from dirt and wear. The ability to replace the tip with a different type of connector makes the cable a successful substitute for several different cables, especially when traveling or during everyday use. Ideal for smartphones, tablets, and small consumer electronics.

Particle’s IoT (Internet of Things) hardware development kit, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120Mhz ARM Cortex M3 micro-controller with a Broadcom Wi-Fi chip in a tiny thumbnail-sized module called the PØ (P-Zero)

The aluminum caliper ensures high corrosion resistance and lightness, which makes it an ideal tool for working in various conditions. This is an essential tool for accurate measurements requiring high precision. YT-70740

Akyga EMC EMV EN2020-16-F is a single-phase EMI filter designed to suppress electromagnetic interference in devices powered by 120-250VAC, improving their stability. Supporting current up to 16A and frequency 50/60 Hz, it works well in power supplies, frequency converters and automation systems.

Prototype board designed to cooperate with Particle Photon. The board has prototype holes with a 2.54 mm pitch and pins of the I2C interface. SparkFun DEV-13598

The module is equipped with four 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. ICSTATION ICSE012A

Mini SPDT type end switch with lever length 13.5mm and current capacity of 1A contacts. Pololu 1528

Small size driver module TB67S279FTG stepper motor powered with 10 ... 47V voltage and working current 1.1A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Module with soldered connectors. Polol 3099

LCD panel with the possibility of controlling its transparency. Can block up to about 95% of incident light. Adafruit 3330

Module with 16-channel PCA9685 servo driver designed for Raspberry Pi minicomputers. The board is equipped with a USB Type C power connector. SparkFun DEV-15316

A set of insulated connectors with multifunctional pliers YT-23133 made of A3 steel and hardened Cr12MoV tool steel, with non-slip handles, enabling quick stripping, cutting of wires and crimping connectors, protected against corrosion, containing various types of red and blue insulated connectors. Yato YT-23133

A compact 8MP USB camera module with an autofocus lens and built-in microphone. Based on the Sony IMX219 sensor, it captures 3280 x 2464 px video at 30 FPS, providing detailed image and sound in a single device. UVC compliance and a wide 62° field of view make it ideal for VR, surveillance, microscopy, and embedded applications without the need for additional drivers. ArduCAM B0431

Small size driver module TB67S279FTG stepper motor powered with 10 ... 47V voltage and working current 1.1A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Polol 3098

Module with a digital temperature and humidity sensor based on the SHT31. Communication via the I2C interface. DFRobot SEN0331

Module with real time clock (RTC) PCF8523 dedicated for minicomputers Raspberry Pi. It communicates via the I2C interface. Adafruit 3386