- -zł53.94

zł103.61 tax excl.
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.
All the native GPIO pins on the XU4 operate at 1.8V. However, many devices support only 3.3V or 5V. This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V. You can choose the voltage with a small hardware slide switch on the board.
The 40-pin header pin map is compatible with the ODROID-C1 and Raspberry Pi/Pi 2. We are working on the WiringPi compatible libraries to simplify development.
The XU3/XU3-Lite requires modification or removal of the 12-pin socket on the XU4 Shifter Shield.
The maximum output current is 4mA. Extra driver circuits may be required to control LEDs, motors or other devices that require more than 4mA.
Package include
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
LCD-TFT touchscreen display 3.5 "(420x320 pixels) with LED backlight The display has a built-in ILI9488 controller, designed for Odroid C0, C1 +, C2 and XU4 computers
Module with OLED display and real-time clock (RTC) dedicated to HC4-P kits. Odroid OLED+RTC for HC4-P
I2S 2Watt Stereo Boom Bonnet Kit for XU4, C2 and C1+
16x2 LCD + IO Shield for ODROID-C1 / C0 / C2 / C4
7" LCD TFT display with a touch panel dedicated to Odroid C4 and N2+ minicomputers. Equipped with HDMI interface for image display and I2C for touch screen. Resolution 1024x600 pixels. ODROID-VU7C
Best low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 sensor and the Si1132 sensor enables measuring temperature, barometric pressure and humidity, UV Index and ambient light at once
SmartPower2 is a power-supply which has WiFi connectivity to control the voltage and switch on/off a connected device. You can also monitor the load current and power consumption remotely on your smartphone, tablet and PC
The ODROID-UPS3 (Uninterrupted Power Supply) device is designed specifically for the ODROID-C1,C1+ and ODROID-C2. It is equipped with a rechargeable Lithium-Polymer Battery, Charger IC and 5Volt Boost DCDC
Net Card 2 for H-series is a network module for Odroid H3 and H4 computers, adding four 2.5GbE Ethernet ports, ideal for applications requiring high network bandwidth, such as home servers or routers. The module is easy to install and fully compatible with the Odroid H2/H3 platform, providing fast and stable network connections.
LCD TFT 5" display with a touch panel dedicated to Odroid minicomputers. Equipped with HDMI interface for image display and USB for touch screen. Resolution 800x480 pixels. ODROID-VU5A
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.