Best sellers

An advanced keylogger equipped with penetration testing tools, remote access and a function that triggers attacks after entering specific keywords. It has a built-in USB Type-A port and emulates devices such as serial port, storage, HID and Ethernet. Hak5 KEY CROC

Device for penetration testing of WiFi networks in the 2.4 GHz 802.11 b/g/n bands. Enables attacks on WPA and WPA Enterprise networks. It can be powered via a USB Type-C cable and is compatible with multiple operating systems, including Windows, Mac, Linux, Android, iOS. Hak5 WiFi Pineapple Mark VII Basic

Module with a 3-color (red, black, white) e-Paper display with a diagonal of 4.2" and a resolution of 400x300 px. SPI interface. Waveshare 4.2inch e-Paper Module (B)

Matte PET-G filament, black, diameter 1.75 mm. There is 0.85 kg of filament wound on the spool. Fiberlogy Matte PET-G Black

The meter allows you to measure the temperature in the range from -10 ℃ to 60 ℃ and humidity from 0% RH to 100% RH. It is equipped with an LCD display with backlight, measurement stop function and automatic switch-off. Uni-T UT333

Black and white e-Paper display with a diagonal of 7.5" and a resolution of 800x480 px. SPI interface. No PCB. Waveshare 7.5inch e-Paper

Multifunction USB tester. It allows you to check the voltage and current flowing through the USB socket and to control the capacity, energy, power, temperature and impedance. AT35

Module with an e-Paper display with a diagonal of 4.26" and a resolution of 800x480 pixels. Thanks to communication via the SPI interface, it allows easy integration with various systems of microcontrollers and single-board computers, including Raspberry Pi. Waveshare 4.26inch e-Paper HAT

Camera with USB interface with 16MP resolution. Equipped with a Sony CMOS IMX298 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM B0268

A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265N

3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264

Waterproof LED indicator with a diameter of 8 mm, powered with the voltage from 9 to 12 V. Blue color

Electronic controller module for building an arcade game. Connectors placed on the board allow you to connect 12 momentary buttons, SANWA joystick, ZIPPY/HIPP joystick and function buttons

Momentary button with a diameter of 12 mm and a height of 21 mm. Red colour

Momentary button with a diameter of 16 mm and a height of 25 mm. Red colour

Smart mini portable soldering iron with 32-bit RISC-V SoC, elegant design and built-in IMU. It can be powered from both the USB-C port and the DC Jack socket. It has an adjustable operating temperature ranging from 100°C to 400°C. Included with a type B tip

A large momentary button with a diameter of 60 mm with LED backlight. White color

A large momentary button with a diameter of 100 mm with LED backlight. Yellow color

Multifunction USB tester. It allows you to check the voltage and current flowing through the USB Type-C socket and to control the capacity, power, temperature and time. Keweisi KWS-1802C

Base board for prototyping IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR modules. It gives access to the full functionality of the XBee module pins, including two USB Type-C connectors for UART communication and firmware updates, a Qwiic connector for I2C-compatible sensors and peripherals. SparkFun WRL-21636