New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
ZED-F9P GPS-RTK HAT for Raspberry Pi - Waveshare 19884
ID: 586279
zł1,370.38
Tax included
zł1,114.13 tax excl.
GPS module with GNSS receiver ZED-F9P. It can receive data from GPS, GLONASS, Galileo and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 10 mm. Waveshare ZED-F9P GPS-RTK HAT
Description
GPS module with GNSS ZED-F9P receiver designed to work with the Raspberry Pi and Jetson Nano minicomputer. The system can receive data from the main positioning systems: GPS, GLONASS, Galileo and BeiDou. The module uses the Real Time Kinematics (RTK) technology, which allows for position accuracy up to 10 mm. It also has a review mode that allows it to become a base station and generate RTCM 3.x correction data.
The module has a 40-pin connector compatible with the Raspberry Pi. Additionally, there is a connector with UART, I2C and SPI interface and a USB connector. The board also has a socket with an ML1220 battery that maintains voltage, which significantly accelerates the start of the device after a momentary power failure. The user can also connect an external antenna through the u.FL connector located on the board.
| 1. ZED-F9P | 7. Battery holder |
| 2. TXS0108EPWR voltage translator | 8. 40-pin connector |
| 3. LED | 9. USB port |
| 4. UART/SPI switch | 10. UART, I2C interface |
| 5. RT9193-33 | 11. u.FL |
| 6. NDC7002N voltage translator | 12. Jumper |
The module is configured via a USB connector and a dedicated u-center application. Full documentation is available on the product Wiki page.
Features
- Integrated u.FL connector
- Receives the bands L1C/A and L2C
- RTK system
- 10 mm accuracy (2.5 m without RTK)
- Maximum update frequency:
- PVT (primary location in the UBX binary protocol) - 25Hz
- RTK - 20 Hz
- Raw - 25 Hz
- Start-up time: 25s (cold start), 2s (hot start)
- Maximum altitude: 50,000 m
- Max G: ≤4
- Maximum speed: 500 m/s
- Speed accuracy: 0.05 m/s
- Course accuracy: 0.3 degrees
- Timing Pulse Accuracy: 30 ns
- Protocol: NMEA 0183 Version 4.10, UBX, RTCM 3.3
- Low power consumption mode
- Interface: USB, UART, I2C, SPI
- 40-pin connector
- Voltage: 5V
- Current consumption: 130 mA
- Dimensions: 65 x 30.5 mm
Kit contains
- ZED-F9P GPS-RTK HAT
- Multi-band antenna
- USB-A to Micro-B cable
- A set of screws
- 2x20-pin female connector
586279
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 4
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł264.91
24h
Available quantity: 11
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł358.90
24h
Available quantity: 130
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,038.93
24h
Available quantity: 2
Available
Other products in the same category (12)
Small GPS location module with L80-39 GPS chip, USB and TTL two ports,easy to be used with Raspberry Pi, Arduino, STM32 and other kind of micrcontrollers. The GPS module uses NMEA0183 communication protocol, integrated ultra-small SMA antenna connector. DFRobot TEL0119
zł201.61
4 weeks
No product available!
Module dedicated to Raspberry Pi, which supports various wireless communication modes, such as LTE-TDD, LTE-FDD, GSM, GPRS and EDGE. With download speeds of up to 10Mbps and upload speeds of up to 5Mbps, this module is perfect for IoT applications such as remote information processing, device monitoring, POS terminals, industrial routers, remote diagnostics and satellite positioning. Waveshare A7670E Cat-1/GNSS HAT
zł126.87
24h
Available quantity: 1
Available
GNSS receiver module dedicated to Raspberry Pi minicomputers. It provides simultaneous reception of up to three types of satellite systems, including GNSS with GPS, Beidou, Galileo and GLONASS. Waveshare NEO-M8T GNSS TIMING HAT
zł599.59
4 weeks
No product available!
KAmodRPi-GPRS-GPS is an overlay for Raspberry Pi 4 / 3B + / 3B / 2B / B + computers, which allows you to enrich the system with the ability to send data via GPRS, SMS transmission or work as a module for Bluetooth communication. This extension also offers the ability to receive satellite data from location systems - GPS and GLONASS.
zł229.00
24h
Available quantity: 47
Available
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
zł1,672.58
4 weeks
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł107.45
24h
Available quantity: 6
Available
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports the RTK function as a base station. Waveshare LC29H(BS) GPS/RTK HAT
zł294.35
24h
Available quantity: 4
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł108.63
24h
Available quantity: 5
Available
GNSS module based on the L76B chip that can work with GPS, BDS and QZSS systems. Communication via a UART interface. SB Components 24056
zł189.69
24h
Available quantity: 2
Available
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports positioning assistance systems (WAAS, EGNOS, MSAS and GAGAN) and EASY technology. Waveshare LC29H(AA) GPS HAT
zł207.17
24h
Available quantity: 1
Available
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports fast, dual-band RTK positioning. Waveshare LC29H(DA) GPS/RTK HAT
zł285.41
24h
Available quantity: 14
Available
Adafruit 2324
zł168.79
24h
Available quantity: 1
Available
GPS module with GNSS receiver ZED-F9P. It can receive data from GPS, GLONASS, Galileo and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 10 mm. Waveshare ZED-F9P GPS-RTK HAT