ArduCAM 2MP AR0230 WDR USB Camera - 2MP USB camera with AR0230 sensor + case

Kit containing a module with two cameras with a sensor OV5647 with a resolution of 5 MP and an expansion module for NVIDIA Jetson Nano. ArduCAM B0217J5

Camera module with Sony IMX219 sensor designed for use with the NVIDIA Jetson Nano, Raspberry Pi, RDK X3, VisionFive2, etc. The camera is equipped with an 8 MPx sensor and has a 160° viewing angle. Waveshare IMX219-160IR Camera

The camera set with the IMX219 8 MPx sensor allows you to rotate the camera, control the angle of inclination and zoom. Works with Raspberry Pi. Swivel base included. ArduCAM B0167B8

A set with a monochrome camera with a resolution of 0.3 MPx with an OV7251 sensor, a USB adapter and a MIPI adapter. Without IR filter. ArduCAM EK028

Mini module Camera Shield w/5 MP OV5642 for Arduino UNO Mega2560 board. ArduCAM B0068

3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264

OV7725 based on Omnivision OV7725 image sensor; low voltage CMOS device provides the full functionality of a single-chip VGA camera and image processor as well as the extraordinary high frame rate and low light performance. It provides full-frame, sub-sampled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface. ArduCAM U3182

Camera module with OV5640 sensor with a resolution of 5 MP. Equipped with auto focus and flash LED, it communicates via the SCCB interface. Waveshare OV5640 Camera Board (C)

A camera module equipped with an OV5693 sensor with a resolution of 5 MP. It uses a USB 2.0 interface, allowing easy connection to a computer or other device that supports this standard. Waveshare OV5693 5MP USB Camera (A)

1 MPx camera module with OV9281 sensor working with Raspberry Pi. Equipped with a shutter and M12 lens mount, no IR filter. ArduCAM B0165

A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091

This 11.9MP Sony IMX708 sensor module offers HD recording and advanced PDAF and CDAF autofocus systems. Equipped with a 102° wide-angle lens and an IR-cut filter, it\'s ideal for surveillance, AI projects, and nature photography. The camera is fully compatible with the Raspberry Pi, supported by libcamera and Picamera2, and the included enclosure makes it easy to integrate into DIY projects. ArduCAM B0307

This camera features a 2048x1536 px sensor and a rolling shutter, designed to interface with microcontrollers via an SPI interface. Its low power consumption (<200 mW), fast wake-up time (42 ms), and support for multiple platforms (Arduino, STM32, ESP32) make it ideal for IoT, monitoring, and automation projects. Simple API commands, the ability to connect up to four cameras, and an open SDK make it a universal tool for engineers and hobbyists. ArduCAM B0400

3D stereo camera module, which is built with two cameras with Sony IMX219 sensor and ICM20948 IMU sensor. It is designed to work with the Raspberry Pi Jetson Nano. Waveshare IMX219-83 Stereo Camera

A set of cameras designed for projects related to artificial intelligence in the IoT area. The module contains three built-in cameras (two 720P and one 12MP) configured using the USB 3.0 interface via the type C connector and the ESP32 module for communication via WiFi or Bluetooth. SparkFun SEN-18737

The Seeed Studio 102110719 camera module with a Sony IMX219 sensor supports both 15- and 22-pin CSI connectors, offering high flexibility in optics selection and applications. Designed for Jetson platforms and Raspberry Pi CM4, it is suitable for AI projects, surveillance, and robotics. Seeed Studio 102110719