![ArduCAM B0162 OV9281 MIPI 1MP - monochrome camera module for Raspberry Pi ArduCAM B0162 OV9281 MIPI 1MP - monochrome camera module for Raspberry Pi](https://kamami.pl/34748-large_default/arducam-b0162-ov9281-mipi-1mp-monochrome-camera-module-for-raspberry-pi.jpg)
![ArduCAM B0162 OV9281 MIPI 1MP - monochrome camera module for Raspberry Pi ArduCAM B0162 OV9281 MIPI 1MP - monochrome camera module for Raspberry Pi](https://kamami.pl/34748-large_default/arducam-b0162-ov9281-mipi-1mp-monochrome-camera-module-for-raspberry-pi.jpg)
zł160.31 tax excl.
1 Mpx camera module with OV9281 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 1280×800 pixels. ArduCAM B0162
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
1 Mpx camera module with OV9281 sensor cooperating with all versions of Raspberry Pi. The sensor used has a matrix with a resolution of 1 Mpx and allows video recording at resolutions of 1280×800/60fps. The module is attached to the Raspberry Pi via a dedicated socket located on the upper side of the board. It uses the MIPI CSI-2 interface specially developed for cooperation with cameras. The set with the camera includes a 15-pin tape for connecting the camera to the Raspberry Pi model B and A, and a 22-pin tape for the Raspberry Pi Zero 2W and the Compute module.
Data sheet
Flex Cable for Raspberry Pi Camera - 100mm / 4"
Flex Cable for Raspberry Pi Camera - 200mm / 8"
Flex Cable for Raspberry Pi Camera - 300mm / 12"
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
No product available!
ArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091
The adapter allows to extend the CSI / DSI interface using two FFC tapes (by connecting them in one tape). It allows you to connect the camera to a Raspberry Pi computer or a DSI display, for distances using two FFC tapes. Adafruit 3671
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The Arducam 2.2MP Mira220 RGB-IR Global Shutter USB3.0 Evaluation Kit enables rapid testing of cameras without coding, offering high image quality and fast capture thanks to the Mira220 sensor with global shutter and BSI technology, ideal for 2D/3D machine vision applications, with interface USB 3.0 for easy integration with various systems. ArduCam EK035
No product available!
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
Small form factor IR camera capable of tracking up to four heat/IR sources, can be controlled with Arduino, AVR via I2C interface. SEN0158
1 MPx camera module with OV9281 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0223
Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 77°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0182
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera
No product available!
Camera module based on ESP32 integrated with 8 MB of PSRAM. The camera is equipped with an OV3660 sensor with a resolution of 3 MPx and WiFi communication. M5Stack U082-X
Camera module with Sony IMX219 sensor works with all versions of Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx, the maximum video resolution is 1080p. ArduCAM B0103
No product available!
1 MPx camera module with OV9281 sensor working with Raspberry Pi. Equipped with a shutter and M12 lens mount, no IR filter. ArduCAM B0165
Camera module with a resolution of 13 MP with a USB 2.0 interface. It is equipped with an IMX258 sensor and optical image stabilization. Waveshare WSH IMX258 13MP OIS USB Camera (A)
No product available!
A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267
No product available!
Official camera module set to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 75 ° with autofocus. Raspberry Pi SC0872
Camera module with Sony Starvis IMX462 sensor that works with Raspberry Pi minicomputers. It has a 2 MP sensor and an 80° viewing angle lens, and is equipped with a movable IR-CUT filter. ArduCAM B0423
Camera module with IMX477 sensor with a resolution of 12.3 MP for NVIDIA Jetson Nano/Xavier and Raspberry Pi Compute Module. ArduCAM B0279
Camera module with Sony IMX219 sensor designed for Raspberry Pi 5 users. It offers a resolution of 8 MP (3280 x 2464 pixels) and a wide viewing angle of 120°. Comes with FPC CSI tape. Waveshare Pi5-IMX219-120
Set with HQ camera and 6 mm wide-angle lens. The set works with all versions of Raspberry Pi minicomputers with a CSI socket. ArduCAM B0240
No product available!
1 Mpx camera module with OV9281 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 1280×800 pixels. ArduCAM B0162