

Monochrome camera module based on the CMOS AR0134 matrix with a resolution of 1280x960 px (1.2 MPx). It supports video recording in the resolution of 1280x960@54fps and 1280x720@60Ffps. It can operate in default mode or preset for frame size, exposure and gain. It communicates via a parallel interface and is intended for use with the ArduCAM USB Shield or USB3.0 Camera Shield module. The device can work in video mode (master) or in frame mode. It is equipped with a LS-6020 lens with a focal length of 6 mm, a viewing angle of 60°, an F2.2 aperture and a 1/3" format.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095
The camera module is based on a CMOS sensor - AR0134. It has a resolution of 1280 x 960 px (1.2 MPx). The module supports recording of video sequences: 1280 x 960 @ 54fps and 1280 x 720 @ 60Ffps. Intended for use only with the ArduCam USB Shield module. Arducam B0100
No product available!
A set of lenses for Arducam cameras. Includes 5 lenses with different viewing angles, two lens holders and a set of screws. Lenses compatible and tested with image sensors such as OV2640 and OV5647. Arducam LK002
Set with a 48 MP camera equipped with an IMX586 sensor. Equipped with digitally controlled focus. Included with a USB 3.0 adapter and cable. ArduCAM EK032
No product available!
An advanced 5MP camera with an SPI interface, it boasts low power consumption, high image quality, and broad compatibility with popular microcontrollers such as Arduino, ESP32, STM32, and RISC-V. This model is equipped with an M12 NoIR lens with manual focus, enabling image capture at night and in low-light environments. An open API and MIT-licensed SDK make the camera ideal for IoT systems, industrial automation, educational, and environmental projects. ArduCAM B0437
Pcam 5C: 5 MP Fixed Focus Color Camera Module with Omnivision OV5640 5 megapixel (MP) color image sensor which includes various internal processing functions, incl. automatic white balance, automatic black level calibration, and controls for adjusting saturation, hue, gamma and sharpness. Digilent 410-358
Camera set with OV5647 5 MPx sensor, allows you to rotate the camera, control the angle of inclination and zoom. Works with Raspberry Pi. Swivel base included. ArduCAM B0167B5
1 MP camera with USB interface. Equipped with a wide-angle lens with a viewing angle of 140°. DFRobot FIT0892
An 8MP camera designed to work with NVIDIA Jetson boards, as well as other systems such as ARM, DSP, and FPGA, offering a wide field of view and high image quality. The camera is very sensitive to infrared light due to the lack of an IR filter, which allows it to be used in applications such as night vision systems, heat detection, and robotic vision systems. ArduCAM B0193
Module with a 48 MP camera equipped with an IMX586 sensor. It has a built-in digitally controlled focus. The set includes a USB 3.0 adapter, a tripod and a cable. ArduCAM B0478
No product available!
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
Camera module with OV5647 5MP sensor dedicated to Raspberry Pi. Designed for 3D printing monitoring systems. Without IR filter. ArduCAM B003301
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 120°. Waveshare IMX219-120 Camera
No product available!
Camera module based on the CMOS MT9V022 matrix with a resolution of 752x480 px (0.36 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0109
Camera module 0.3 Mpx and with OV7251 sensor working with Raspberry Pi. The maximum video resolution is 640 × 480 pixels, without the IR filter. ArduCAM B0206
No product available!
8 Mpx camera module with IMX219 sensor. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0180
Inspection camera with a flexible probe, 1m long. It allows you to observe the interior of the devices from different angles through a small inspection opening without the need to disassemble them. Uni-T UT665
No product available!
Module with 8 Mpx camera with IMX219 sensor and wide-angle "fisheye" lens. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0287
No product available!
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
Camera module based on CMOS AR0134 matrix with a resolution of 1280x960 px (1.2 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0110