

zł331.59 tax excl.
A kit for building a NAS server based on the Raspberry Pi CM4 module. It has space for mounting two 2.5" SATA drives and an LCD display for monitoring the minicomputer's operating status. Waveshare CM4-NAS-Double-Deck (EU)
CM4-NAS-Double-Deck is a kit for building a NAS server based on the Raspberry Pi CM4 module. Umożliwia łatwy dostęp do interfejsów komputera, w tym dwóch portów USB 2.0, portu Gigabit Ethernet RJ45 oraz HDMI i kart microSD. It uses a base board dedicated to Compute Module 4, which forms the basis of the minicomputer. On it, the user will find connectors for the DSI display, a voltage backup battery slot, a camera port, a fan connector and a 40-pin GPIO connector. An additional module with a 2" LCD display has two connectors to connect 2.5" SATA drives, which are the most important part of the device.
The included case gives access to the basic ports of the minicomputer. It is equipped with power and user buttons. The main function of this equipment is data storage. Gathering all the photos, videos, music and games, it creates a multimedia library enclosed in a small NAS drive enclosure.
The chassis has a built-in 2" LCD display controlled by an SPI interface. It is used for real-time monitoring of the CM4's operating status, including CPU parameters, RAM, system disk usage, network speed and operating temperature. A built-in fan is responsible for proper cooling. Full documentation and configuration examples are available on the product page.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM, 8 GB eMMC and wireless connectivity. Raspberry Pi CM4104008
No product available!
Adapter with USB and HDMI connectors connected via FFC tape, among others for CM4-IO-BASE base plates. Waveshare USB HDMI Adapter
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 72°. ArduCAM B006603
Base board for Raspberry Pi CM4. It allows you to add 4G, 5G or LoRa communication via the M.2 B Key or Mini-PCIe connector. Comes with 4G SIM7600G-H-PCIE module. Waveshare CM4-IO-WIRELESS-BASE-Acce-A-EU
Base board prepared for Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare CM4-IO-BASE-B
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
Kit with base board for Raspberry Pi CM4. It allows you to connect modules with 4G, 5G or LoRa communication via the M.2 B Key or Mini-PCIe connector. Waveshare CM4-IO-WIRELESS-BASE
Portable game console based on Raspberry Pi CM3+ Lite, equipped with LCD IPS 2.8" display, battery and speaker. Waveshare GPM2803P0
No product available!
A set with IoT Router Carrier Board Mini and PiTray Mini base boards and a housing dedicated to Raspberry Pi CM4 modules. DFRobot DFR0767-2
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Dual Gigabit Ethernet 5G/4G Base Board. Waveshare CM4-DUAL-ETH-4G/5G-BOX-EU
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal case with a fan, a power supply and a Mini Base Board (A) and a USB HDMI to FCC adapter. Waveshare CM4-IO-BASE-Acce C
CM4-IO-BASE-B base board dedicated to Raspberry Pi CM4 modules in a set with a USB HDMI adapter to FCC. Waveshare CM4-IO-BASE-Acce B
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Dual ETH Quad RS485 Base Board. Waveshare CM4-ETH-RS485-BOX-B-EU
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two RJ45 connectors, three USB 3.2, HDMI, DSI and CSI. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-DUAL-ETH-BASE
No product available!
Cooling module designed to provide efficient cooling for the Uptime Industries Compute Blade platform, especially in the case of heavy workloads and 24/7 operation. Thanks to the advanced cooling system, RP2040 microcontroller and temperature sensors, the device guarantees stable operation and eliminates the risk of overheating, and also allows for flexible adjustment of the work logic and seamless integration with the Compute Blade. Uptime Industries FanSMART-1V1-0
No product available!
Base board dedicated to Raspberry Pi CM4 modules. Equipped with a 2.8" IPS LCD display and an expander. Waveshare CM4-DISP-BASE-2.8A-Acce-A
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal casing with a fan, a power supply and a base plate. It has the function of a UPS. Waveshare CM4-POE-UPS-BOX (EU)
A kit for building a NAS server based on the Raspberry Pi CM4 module. It has space for mounting two 2.5" SATA drives and an LCD display for monitoring the minicomputer's operating status. Waveshare CM4-NAS-Double-Deck (EU)