- New
KAmodRPi5 PCIe-M.2 mini - Miniature NVME M.2 M-Key Drive Adapter for Raspberry Pi 5
ID: 1192946
zł35.83
Tax included
zł29.13 tax excl.
KAmod RPi5 M.2 mini allows you to connect NVMe M.2 drives, which allows you to use it as a multimedia center or file server, while maintaining a small size and low power consumption
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The Raspberry Pi 5 computer is equipped with a PCI Express interface led out to a custom, miniature FFC connector marked on the board as PCIe. It allows you to connect modern SSDs that support the fast and reliable NVME protocol, and then the Raspberry Pi can become a multimedia center or file server, while maintaining a small size and energy efficiency. This requires the use of the KAmod RPi5 M.2 mini adapter, which allows you to connect an NVME drive with an M.2 M-key connector, in size 2230 or 2242.
Features
- The adapter is designed for easy mounting on the Raspberry Pi 5 board
- The connection to the Raspberry Pi 5 computer is via FFC 16/0.5 tape
- Does not block the 40-pin GPIO connector
- Allows you to connect an NVME drive with an M.2 M-key (NGFF M-key) connector
- Communication via the PCI Express Gen2 x1 interface (optionally also Gen3 x1)
- Allows you to mount a 2230 or 2242 drive
- Provides a voltage of 3.3 V and a maximum current of 1 A to power the drive
- LED indicators signaling correct power supply and drive activity
- The design of the adapter does not block the possibility of using a radiator with a fan dedicated to Raspberry Pi 5 - Raspberry Pi Active Cooler
- Dimensions: 32.5x64 mm
Note!
Not every NVME M.2 drive is compatible with the Raspberry Pi 5 computer
Included
- KAmod RPi5 M.2 mini adapter
- FFC 16/0.5 tape
- Mounting kit:
- M2 screw - 4 pcs.
- Spacer - 2 pcs.
- M.2 drive mounting clip
1192946
Data sheet
- Compatible with
- Raspberry Pi 5
Other products in the same category (16)
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł86.25
24h
Available quantity: 4
Available
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
zł1,861.14
4 weeks
No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT
zł1,206.14
6 weeks
No product available!
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
zł102.90
24h
Available quantity: 3
Available
3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX
zł61.82
24h
Available quantity: 21
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
zł159.90
24h
Available quantity: 5
Available
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
zł99.91
24h
Available quantity: 12
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł141.03
24h
Available quantity: 2
Available
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł45.13
24h
Available quantity: 18
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł103.01
24h
Available quantity: 3
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
24h
Available quantity: 2
Available
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
zł347.98
24h
Available quantity: 7
Available
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
zł556.05
24h
Available quantity: 2
Available
The HAT module is designed to integrate with the Raspberry Pi, which allows the connection of the LoRaWAN Gateway WM1302 module in mini-PCIe format. Equipped with a LoRaWAN authorization chip and a GPS module, this module creates a complete LoRaWAN communication gateway, ideal for IoT applications such as smart farming and cities. Seeed Studio 113100022
zł122.59
24h
Available quantity: 2
Available
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
KAmodRPi-GPRS-GPS is an overlay for Raspberry Pi 4 / 3B + / 3B / 2B / B + computers, which allows you to enrich the system with the ability to send data via GPRS, SMS transmission or work as a module for Bluetooth communication. This extension also offers the ability to receive satellite data from location systems - GPS and GLONASS.
zł229.00
24h
Available quantity: 51
Available
KAmod RPi5 M.2 mini allows you to connect NVMe M.2 drives, which allows you to use it as a multimedia center or file server, while maintaining a small size and low power consumption