

zł1,309.52 tax excl.
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B) (with case)
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It is based on the Qualcomm Snapdragon X55 chip, which guarantees multi-band frequency support, thanks to which the device can be used in countries and regions such as China, Japan, South Korea, Europe or the Middle East. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. SIM8202G-M2 supports positioning within GPS, GLONASS, Beidou, Galileo and QZSS systems, Dial-up function and communication with devices in the cloud. It is supported by AT commands.
The base board is equipped with an M2 connector, thanks to which it enables connection with various 4G or 5G communication modules with an M2 connector. The board also has a USB 3.1 port, audio jack, decoder and two SIM card slots. The set is connected to the Raspberry Pi using a standard 40-pin connector.
1. 40-pin GPIO connector | 7. Audio connector |
2. Switch | 8. Antenna connector |
3. M.2 slot | 9. Reset |
4. SIM slot | 10. Power supply switch |
5. USB 3.1 | 11. Fun |
6. USB type C | 12. LED indicator |
The set includes a housing, antennas and a cooling fan. The housing has universal mounts that allow the device to be mounted on a wall or DIN rail. Full documentation is available on the product Wiki page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The set with the SIMCom 5G module SIM8202G-M2 designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (EU)
No product available!
SIMCom 5G SIM8262E-M2 module with Qualcomm Snapdragon X62 chip. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2
No product available!
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
PCIe TO MiniPCIe GbE USB3.2 HAT+ expansion with EG25-G modem provides reliable LTE connectivity, high-speed data transfer via USB 3.2 ports, and efficient wired Ethernet connection. Dedicated for Raspberry Pi 5, it offers a comprehensive communication solution for industrial projects, edge routers, IoT gateways, and positioning applications.
No product available!
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 22564
PCIe to Ethernet Adapter for Raspberry Pi 5. Extends the functionality of the Raspberry Pi 5 by adding a Gigabit Ethernet port with the high-performance RTL8111H controller. The adapter connects to the Raspberry Pi 5 using a 16-pin PCIe cable. Waveshare PCIe TO Gigabit ETH Board (C)
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
No product available!
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
No product available!
HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT
HAT designed for Raspberry Pi minicomputers with a two-channel RS232 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS232 HAT
UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
The PCIe HAT for 4G/5G modems and USB 3.2 Gen1 enables integration of high-speed cellular connectivity and USB port expansion in Raspberry Pi 5 projects. It supports M.2 Key B standard modems, ensuring compatibility with a wide range of frequencies and SIM card formats. The built-in power monitoring system and HAT+ compliance allow for advanced power management. Ideal for use in industrial routers, IoT gateways, mobile communication systems, and projects requiring fast 4G/5G network access.
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT
The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN
PCIE TO 4-CH NVME Board (B) NP is a PCIe expansion board for Raspberry Pi 5, allowing connection of up to four NVMe drives, improving system performance and enabling SSD boot. With power supply via Pi5 or an external source and support for multiple M.2 formats, it is ideal for expanding storage in projects requiring high speed and reliability. Version without power adapter and power cable, intended for users with their own power infrastructure.
No product available!
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B) (with case)