- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
OKdo starter kit with micro: bit module
ID: 1182103
Starter kit with micro:bit v2. Includes USB cable, battery basket and PVC casing. OKdo micro:bit Getting Started Kit
Description
OKdo starter kit containing the BBC micro:bit v2 board and accessories necessary to start playing with programming, including a PVC case, a battery holder with a switch and a 1 m long USB cable.
Micro:bit v2 is an educational module with a 32-bit ARM Cortex-M4 processor designed for the youngest in order to interest them in computer engineering. On a plate with dimensions of 52 x 43 mm there are, among others accelerometer, magnetometer, temperature sensor, LED matrix, touch button, as well as Bluetooth and USB connectivity. The module can be programmed by e.g. by the popular MakeCode editor. The manufacturer also provides a mobile application, available for Android and iOS phones, with which you can send the code to the device via Bluetooth connectivity.
Features
- Microcontroller with ARM Cortex-M4 64 MHz core with FPU
- 512 KB Flash
- 128 KB of RAM
- LED matrix 5x5 (red)
- Two programmable buttons, tactile logo
- MEMS microphone and LED indicator
- Light sensor, compass, accelerometer, temperature sensor and speaker
- 2.4 GHz micro: bit Radio/BLE 5.0 Smart Antenna
- 25-pin edge connector
- 4 dedicated GPIO, PWM, I2C, SPI
- Three digital/analog I/O ports
- Two power ports: 3V and GND
- Dedicated I2C bus for peripheral devices
- MicroUSB connector (5V)
- JST-PH battery connector
- Power/reset button with status LED
- Programmable in C ++, MakeCode, Python, Scratch
Kit contains
- Educational module micro:bit v2
- 1m micro USB cable
- Basket for two AAA batteries
- PVC casing
- Instruction
1182103
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł82.90
24h
Available quantity: 21
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł96.90
24h
Available quantity: 1
Available
Starter kit with micro:bit v2. The set includes the most necessary elements needed to implement micro:bit projects: LEDs, buttons, potentiometer, servo, prototype board and a set of cables. SparkFun KIT-17362
zł321.01
Delivery date unknown
No product available!
Other products in the same category (16)
3/8" torque wrench with 72T mechanism, range viewing window, torque range 10-60 Nm, length 415 mm, accuracy +/- 4%, made of 42CrMO with PVC handle, intended for precise tightening of threaded connections, includes calibration certificate and rotation direction switch. YT-07735
Retired
No product available!
The Siglent SDG1032X, featuring a 30 MHz maximum output frequency and two output channels, is an indispensable function generator for engineers and technicians. With a sampling rate of 150 MSa/s, 16kpts memory, and 16-bit vertical resolution, this device provides high precision and reliability. Its compact design, along with standard USB and LAN interfaces and an optional GPIB, facilitates seamless integration into measurement systems and automation of tasks. Siglent SDG1032X
Retired
No product available!
Serial port to Ethernet converter module based on the ESP32 series from Wireless-Tag. It integrates an optimized TCP/IP protocol stack and is characterized by extremely high performance, stability, versatility and reliability. WT32-ETH01
Retired
No product available!
ToolkitRC Q6AC is a versatile modeling charger that supports up to four batteries at a time, compatible with LiPo, LiFe, Li-Ion, NiMH and Pb cell types. It provides up to 400W of power when powered by AC mains and up to 1000W when powered by DC external power, and also offers fast charging via USB-C PD (65W) and USB-A Fast Charge (18W) ports.
Retired
No product available!
USB-UART converter with four isolated UART ports with built-in isolation of 1.5kV/3kV. It guarantees data transmission speeds of up to 12 Mbps and the ability to work with 1.8 V or 3.3 V voltage systems on the UART side. It is equipped with a USB Type C connector and is capable of operating in a wide temperature range from -40°C to +55°C. Electronic Prototypes EPED001A-10-STD
Retired
No product available!
e-Paper display controller module with a standard Arduino connector. It has a built-in MX25R6435F Flash memory with a capacity of 8 MB and a 24-pin FFC connector dedicated to e-Paper displays. Waveshare e-Paper Shield (B)
Retired
No product available!
NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S
Retired
No product available!
NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 2 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
Matte PET-G filament, black, diameter 1.75 mm. There is 0.85 kg of filament wound on the spool. Fiberlogy Matte PET-G Black
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Pro
Retired
No product available!
Starter kit with micro:bit v2. Includes USB cable, battery basket and PVC casing. OKdo micro:bit Getting Started Kit