SIM7600E LTE Cat-1 / 3G / 2G GNSS HAT module for Raspberry Pi - Waveshare 17954
ID: 1182353
17954
zł249.08
Tax included
zł202.50 tax excl.
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
Description
The SIM7600E LTE Cat-1 HAT is a module that extends the capabilities of the Raspberry Pi to communicate over GSM/GPRS cellular networks. It uses Simcom's SIM7600E chip, and with it it is possible to make and receive calls (it is possible to attach a microphone and headphones via a jack socket), send and receive SMS messages, and use wireless Internet. It also has built-in support for positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. The module is controlled by AT commands via the UART of the Raspberry Pi computer. It has rich support in the form of libraries for Raspberry Pi, Arduino, STM32.
| 1. SIM7600E | 13.USB-UART |
| 2. CP2102 | 14. MAIN antenna connector |
| 3. Audio decoder NAU8810 | 15. AUX antenna connector |
| 4. Voltage translator 3,3V/5V | 16. GNSS antenna connector |
| 5. MP2128DT | 17. Power switch |
| 6. SPX29302 | 18. GSM indicator |
| 7. GPIO | 19. Power indicator |
| 8. SIM control interface | 20. Voltage jumper |
| 9. SIM socket | 21. UART jumper |
| 10. MicroSD socket | 22. Power jumper |
| 11. Jack 3,5mm | 23. USB pads |
| 12. USB | 24. BOOT |
Features
- Based on the chip: SIM7600E
- Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
- Supports GNSS positioning (GPS, GLONASS, BeiDou, QZSS).
- Built-in USB interface for testing AT commands, obtaining GPS positioning data
- Connector with derived UART interface to connect to hosts such as Arduino/STM32
- Internal voltage translator, defaults to 3.3V, allows switching to 5V using a 0Ω resistor
- SIM card slot
- 2x LED indicators
- Transmission speed: 300bps ~ 4Mbps
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM extended AT commands)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- 3.5mm jack connector for headset connection
- Frequency band:
- LTE Cat-1: LTE-TDD: B38 / B40 / B41, LTE-FDD: B1 / B3 / B5 / B7 / B8 / B20
- 3G: UMTS / HSPA +: B1 / B5 / B8
- 2G: GSM / GPRS / EDGE: 900 / 1800 MHz
- 16-channels
- Sensitivity: -159 dBm (GPS) / -158 dBm (GLONASS) / -159dBm (BeiDou)
- Cold start: 35 s
- Hot start: 1 s
- SMS: MT, MO, CB, Text, PDU
- Power supply: 5V
- Operating voltage: 5V/3.3V (default is 3.3V)
- Operating temperature: -30~80 ° C
- Dimensions: 56.21 x 65.15 mm
Kit contains
- SIM7600E LTE Cat-1 HAT
- LTE antenna
- External GPS antenna (B)
- 2 x microUSB - USB cable
- Set of mounting spacers (2 pieces)
1182353
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 148
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 119
Available
Other products in the same category (16)
The 2-CH CAN MiniPCIe card is a versatile tool for integrating and analyzing CAN bus networks in industrial PCs, development boards, and embedded systems. With isolated channels, broad protocol compatibility, and support for multiple development platforms and operating systems, it is ideal for applications such as automation, automotive systems, CAN network testing, and software development.
zł336.55
4 weeks
No product available!
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
zł1,672.58
4 weeks
No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT
zł1,206.14
4 weeks
No product available!
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
zł25.90
4 weeks
No product available!
Expansion Shield X300 with RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. Compatible with Raspberry Pi Model B+, Pi 2 Model B and Pi 3 Model B
Regular pricezł269.83zł176.19
24h
Available quantity: 3
Available
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł115.26
24h
Available quantity: 6
Available
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.
zł95.02
24h
Available quantity: 3
Available
The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589
zł39.53
24h
Available quantity: 2
Available
PCIe TO PCIe x1 Board (C) with EU power adapter is a practical adapter that enables connecting standard PCIe cards to the Raspberry Pi 5. The dedicated 12 V power supply ensures stable operation of high-demand PCIe devices, and the universal slot supporting x1 to x16 formats offers great flexibility in selecting expansions. It is an ideal solution for building compact systems with network, storage, or industrial interface extensions.
zł57.27
24h
Available quantity: 2
Available
The PCIe TO M.2 HAT+ Acce A kit with a 128 GB SSD is a ready-to-use solution that expands the Raspberry Pi 5 with fast NVMe storage, providing enhanced performance and the ability to boot from the drive. With its compact design, power monitoring support, and compatibility with 2230/2242 form factors, the kit is ideal for building home servers, NAS systems, workstations, and projects requiring high data throughput.
zł142.62
4 weeks
No product available!
PCIe TO USB 3.2 Gen1 Board (C) is a functional expansion for the Raspberry Pi 5, enabling the connection of four high-speed USB devices with independent power management. It is ideal for applications requiring multiple ports, such as laboratories, workstations, or automated systems, where stability, performance, and full control over peripheral devices are essential.
zł63.23
24h
Available quantity: 3
Available
PCIe TO 2-CH PCIe HAT is a versatile PCIe expansion board for Raspberry Pi 5, enabling simultaneous connection of two PCIe HAT modules. With support for stacked mounting and the PCIe Gen2 standard, it is an ideal solution for testing, expansion, and prototyping devices using Raspberry Pi 5 and high-bandwidth interfaces.
zł63.25
24h
Available quantity: 2
Available
PCIE TO 4-CH NVME Board (B) (EU) provides significant functionality expansion for the Raspberry Pi 5, enabling the use of high-speed NVMe SSDs. The version with an included power supply offers a ready-to-use solution for applications requiring high data throughput and reliable storage, such as NAS systems, surveillance, or miniature servers.
zł147.61
4 weeks
No product available!
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł106.80
4 weeks
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł107.45
24h
Available quantity: 5
Available
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT