Pico-SIM868-GSM/GPRS/GNSS - GSM/GPRS/GNSS module for Raspberry Pi Pico
ID: 587049
zł121.91
Tax included
zł99.11 tax excl.
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. Waveshare Pico-SIM868-GSM/GPRS/GNSS
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The module with SIM868 is designed to work with the Raspberry Pi Pico. It enables communication in the 2G and Bluetooth 3.0 standard, as well as positioning using GNSS systems such as GPS, GLONASS and BeiDou. It can be controlled by AT commands and supports communication protocols such as HTTP, MQTT, TCP, UDP, FTP, etc. Due to its low latency, low power consumption and long range, it is an ideal choice for applications in small devices requiring telephone calls , SMS, positioning and Bluetooth communication.
The module has an integrated 3.7 V Li-Po battery charging system, two LEDs to indicate operation and a SIM card slot. The board is equipped with a microphone and a speaker connector. It is compatible with 3.3V systems. Full documentation with examples is available on the product Wiki page.
Pinout
Features
- 2G: GSM 850 / EGSM 900 / DCS, 1800 / PCS 1900 MHz
- GNSS: GPS, GLONASS, BeiDou
- 2G data transfer rate: 85.6 (DL) /85.6 (UL)
- Protocols: TCP / UDP / HTTP / SSL / FTP / POP3 / SMTP / MQTT
- Power supply: Li-Po battery or USB RPI Pico connector
- A SIM card
- GNSS and LTE, BT antenna connector
- Microphone and speaker connector
- Network and charging LED indicator
- Working voltage: 3.3V
- Current consumption: 10 mA (idle), 1.2 mA (sleep mode), 3.2 uA (PSM)
- Dimensions: 76.15 x 24 mm
Kit contains
- Pico-SIM868-GSM/GPRS/GNSS module
- LTE antenna
- GNSS antenna
- Bluetooth antenna
- 2 x 20-pin female connector
- 40-pin male connector
- 3.7 V Li-Po battery
- Loudspeaker
587049
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł20.90
24h
Available quantity: 155
Available
Module with LCD IPS display, 1.14" diagonal and 240x135 px resolution. Communication via SPI interface. Waveshare Pico-LCD-1.14
zł36.04
24h
Available quantity: 8
Available
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU
zł110.42
24h
Available quantity: 5
Available
Module with a precise clock RTC DS3231. Communication via the I2C interface. Waveshare Pico-RTC-DS3231
zł40.18
24h
Available quantity: 1
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł39.82
24h
Available quantity: 7
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł30.00
24h
Available quantity: 1
Available
Other products in the same category (16)
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
zł72.82
24h
Available quantity: 2
Available
The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232
zł24.12
24h
Available quantity: 12
Available
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895
zł265.77
24h
Available quantity: 1
Available
Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT
zł84.88
4 weeks
No product available!
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
zł18.91
24h
Available quantity: 19
Available
Module with 4 relays and optoisolation. Equipped with RP2040 chip and ESP8266 WiFi module. Can communicate via RS485 bus. SB Components 24124
zł439.00
24h
Available quantity: 3
Available
The module with the UART-RS485 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3485 chip and enables data transmission between the UART interface and the RS485 device. Waveshare Pico-2CH-RS485
zł24.94
24h
Available quantity: 19
Available
2-channel converter for Raspberry Pi Pico that provides easy communication between UART TTL serial interface and RJ45 Ethernet. Waveshare Pico-ETH-CH9121
zł53.90
24h
Available quantity: 12
Available
WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266
zł41.62
24h
Available quantity: 7
Available
Ethernet network module with W5100S chip dedicated to Raspberry Pi Pico. It communicates via the SPI interface and works with 3.3 V and 5 V systems. WIZnet-Ethernet-HAT
zł30.90
24h
Available quantity: 16
Available
Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342
zł284.79
24h
Available quantity: 2
Available
L76B based GNSS module that can work with GPS, BDS and QZSS systems. Communication via the UART interface. Waveshare Pico-GPS-L76B
zł69.56
24h
Available quantity: 10
Available
The module with SIM7080G is designed for communication in the NB-IoT and Cat-M standard. It also enables the use of GNSS systems for positioning. Waveshare Pico-SIM7080G-Cat-M/NB-IoT (EN)
zł155.40
24h
Available quantity: 4
Available
The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642
zł262.49
24h
Available quantity: 2
Available
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
zł144.29
24h
Available quantity: 2
Available
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
zł264.19
24h
Available quantity: 2
Available
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. Waveshare Pico-SIM868-GSM/GPRS/GNSS