![Main view Main view](https://kamami.pl/81730-large_default/mot0113-silnik-krokowy-nema17-ze-sruba.jpg)
![Main view Main view](https://kamami.pl/81730-large_default/mot0113-silnik-krokowy-nema17-ze-sruba.jpg)
zł150.41 tax excl.
NEMA17 bipolar stepper motor included with a 300 mm long T8 trapezoidal screw. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 2.4 V and a current consumption of 1.5 A per coil. 17HD40005-300N
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
NEMA17 bipolar stepper motor included with a 300 mm long T8 trapezoidal screw. It has a resolution of 200 steps/revolution (1.8° per step). It is powered by 2.4 V and the current consumption is a maximum of 1.5 A per coil. It has a holding moment of 4.2 kg-cm. The set can be used as an element in 3D printers.
Vibration damper for NEMA17 (Damper) engines. Suppresses vibrations and vibrations occurring at engine operation. Dimensions: 39x39x6mm
L-bracket for NEMA17 stepper motor (Bracket L). Allows for safe assembly of the motor in the device
Heatsink for NEMA17 stepper motor. Mounted on M3 screws. Dimensions: 40x40x11mm
Copper heating block dedicated to printers with a Volcano nozzle. It has a thermistor holder. Ensures effective and uniform heating of the printing nozzle
Pulley GT2 48T B5 for a shaft with a diameter of 5 mm. It has 48 teeth, suitable for a 6mm wide belt
Flexible coupling for shafts with a diameter of 5 mm and 6 mm. It is made of aluminum, has a diameter of 19 mm and a length of 24 mm
DRV8825 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2982
The stepper motor driver with the MP6500 system allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage in the range 4.5 ... 35 V. Pololu 2966
Direct type extruder designed for 3D printers, including but not limited to the Ender 3. It has high quality gears and an LDO motor to ensure the filament is moved with confidence and precision. Mellow NF-sunrise v1.1
High flow adapter for E3D V6 nozzle, which allows you to connect a nozzle to increase the heating surface of the filament
HK 3D Printer Hot Plate MK2B Dual Power RepRap Mendel and RAMPS Compatible (46896)
Universal control module designed for 3D printers. It is based on the STM32G0B1 microcontroller, but can use a Raspberry Pi CM4 or CB1 minicomputer as the main module. It has a built-in interface for connecting displays, LED strips and temperature sensors. BIGTREETECH Manta M5P
Compact stepper motor controller with the TMC2208 system with operating voltage from 4 to 35 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the STEP/DIR interface and is an ideal solution for 3D printers and similar applications
Bearing GT2 pulley for shaft diameter 5 mm. It has 20 teeth, suitable for a 6mm wide belt
Extruder controller with CAN communication dedicated to 3D printers. It is designed to work with type 36 stepper motors and is a perfect solution for 3D printing enthusiasts and professionals who are looking for a reliable controller for precise control of the extruder. BIGTREETECH EBB36 CAN (MAX31865)
Bowden type extruder designed for 3D printers including the Ender 3 and Creality CR10, among others. It has high quality gears to ensure the filament is moved with confidence and precision. Trianglelab RNC Nano
No product available!
Ceramic heater designed for installation in the heating block of a 3D printer. Power 40 W, powered by 24 V
Pulley GT2 30T B8 for a shaft with a diameter of 8 mm. It has 30 teeth, suitable for a 6mm wide belt
The module with a 3.5-inch LCD display is a compact screen that offers the ability to conveniently display information on devices. It is dedicated to 3D printers and offers the ability to connect to E3 series motherboards via the EXP1+EXP2+EXP3 interface. BIGTREETECH TFT35-E3 V3.0
NEMA17 bipolar stepper motor included with a 300 mm long T8 trapezoidal screw. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 2.4 V and a current consumption of 1.5 A per coil. 17HD40005-300N