- New
zł5.15
ACS37042KLHBLT-010B3 Current Sensor Compact - module with current sensor -10A to +10A, 3.3V
ID: 1197861
zł19.13
Tax included
zł15.55 tax excl.
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5454
Description
ACS37042 Micro Carrier is a compact module based on the Allegro current sensor, utilizing Hall effect technology and providing galvanic isolation for current measurement. The device features an extremely low current path resistance, minimizing power losses and ensuring high accuracy for both DC and AC current measurement. The analog output offers a wide 150 kHz bandwidth, enabling fast and precise current monitoring in dynamic systems. The sensor response time is less than 5 µs, making it ideal for applications that require quick feedback.
The module provides five essential connections: current inputs IP+ and IP-, power supply pins VDD and GND, and the signal output VOUT. The supply voltage should be connected to the VDD and GND pads marked on the back of the PCB. At the VOUT pin, the sensor outputs an analog signal with a baseline of 1.65 V, which shifts proportionally to the current flow. Positive current increases the output voltage, while negative current decreases it.
The board can be connected in the current path in multiple ways, depending on the application. In high-current scenarios, it is possible to solder 10 AWG wires directly to the mounting holes. These holes are also compatible with M3.5 mounting holes and screw terminals with a pitch of 3.5 mm or 5 mm, allowing for flexible installation in both prototypes and production systems. Alternatively, goldpin headers may be used, but they are not recommended for high-current use.
The sensor features integrated temperature compensation, ensuring high accuracy across the entire operating temperature range from -40°C to 125°C, in compliance with automotive standards. The design is non-ratiometric, meaning the zero point and sensitivity are unaffected by power supply variations, ensuring stability and noise immunity. Thanks to its small size, this module is perfect for space-constrained applications.
Features
- Chip: ACS37042KLHBLT-010B3
- Measurement range: ±10 A (bidirectional)
- Supply voltage: 3.0 V to 3.6 V (typical 3.3 V)
- Sensitivity: 132 mV/A
- Zero output: 1.65 V
- Current path resistance: ~1.6 mΩ
- Bandwidth: 150 kHz
- Response time: < 5 µs
- Temperature compensation
- Operating temperature: -40°C to 125°C
- Galvanic isolation: 285 Vrms
- Dimensions: 17.8 × 20.3 mm
1197861
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±10 A
- Sposób podłączenia
- Szeregowy
- Dimension diagram of the ACS3704x Current Sensor Carriers (666,94 kB)
- 3D model of the ACS37041 Current Sensor Compact Carriers (2,82 MB)
- Drill guide for the ACS37041 Current Sensor Compact Carriers (17,36 kB)
- 3D model of the ACS37042 Current Sensor Compact Carriers (2,83 MB)
- Drill guide for the ACS37042 Current Sensor Compact Carriers (17,88 kB)
- Schematic (33,36 kB)
- ACS37041/2 datasheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 5962
Available
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 20906
Available
2-pin ARK mounting strip, 3.5 mm pitch. 381-3.5-02P-14-00AH
Delivery date unknown
No product available!
2-pin ARK mounting strip, 3.5 mm pitch. 381-3.5-02P-14-00AH. Set of 10 pieces
zł7.23
24h
Available quantity: 8
Available
Other products in the same category (16)
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł23.87
24h
Available quantity: 1
Available
This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals and a 240 Vrms jumper. Pololu 5412
zł191.44
4 weeks
No product available!
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5455
zł19.13
4 weeks
No product available!
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features an analog VOUT output with a sensitivity of 44 mV/A and a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5441
zł15.89
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5258
zł58.79
24h
Available quantity: 2
Available
Module with INA237 sensor designed for power monitoring. Allows measurement of voltages up to 85 VDC and current up to 10 A. Uses a 16-bit ADC for precise and accurate readings available via the I2C interface. Adafruit 6340
zł50.09
24h
Available quantity: 3
Available
ACS711EX Current Sensor Carrier -15.5A to +15.5A
zł21.86
24h
Available quantity: 8
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5446
zł17.10
4 weeks
No product available!
A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5235
zł63.04
24h
Available quantity: 2
Available
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5243
zł22.16
4 weeks
No product available!
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features an analog VOUT output with a sensitivity of 66.7 mV/A and a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5443
zł15.89
4 weeks
No product available!
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł42.39
24h
Available quantity: 4
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5295
zł46.19
24h
Available quantity: 4
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5447
zł17.10
4 weeks
No product available!
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252
zł58.79
24h
Available quantity: 1
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5454