RPi Motor Driver Board for Raspberry Pi - Waveshare 11820

This add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. 

HAT with TB6612FNG engine controller and PCA9685 PWM controller designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector characteristic of Raspberry Pi, making it compatible with all minicomputers with this connector. Waveshare Motor Driver HAT

Extension module for Raspberry Pi. It allows you to control two DC motors, support encoders, 4 servos, IMU 9DoF and connect Qwiic modules. SparkFun ROB-16328

The official extension module (HAT) dedicated to the Raspberry Pi. It allows you to control LEGO SPIKE Prime motors and service LEGO sensors. Raspberry Pi SC0622

DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Kit with connectors for self-assembly. Pololu 5072

The Bus Servo Driver HAT (A) with the ESP32-WROOM-32 microcontroller enables simultaneous control of up to 253 ST and RSBL servos, supporting both wired and wireless communication in robotic applications. Designed for integration with Raspberry Pi, it features 5 V power supply from a converter and full support for UART and USB-C transmission. JSON command handling and automatic WiFi network startup allow for remote control and easy integration with various development environments. Ideal for robotic arm projects, walking robots, and other constructions requiring multiple servos with closed-loop control.

Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762

DFRobot 0592 is a Raspberry Pi DC motor driver board with built-in encoder interface that can drive a 2-way DC motor and a DC motor with encoder

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 Voperating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.

DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Board with soldered connectors. Pololu 5071

Module with 16-channel PCA9685 servo driver designed for Raspberry Pi minicomputers. The board is equipped with a USB Type C power connector. SparkFun DEV-15316

HAT with two-channel DC motor driver for Raspberry Pi. It has an operating voltage from 6 to 24 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron HAT-MDD10

DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5048

Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Self-assembly set. Pololu 2761

PCA9685 servo controller module dedicated to Raspberry Pi minicomputers. Allows control of 16 PWM channels. Waveshare Servo Driver HAT (B)

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Pololu 2753