Reverse Voltage Protector - reverse voltage protection module 4-60V, 12A
ID: 1196553
zł10.58
Tax included
zł8.60 tax excl.
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity up to -60 V. By utilizing the LM74500-Q1 ideal diode controller and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow; however, in the event of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features a very low power path impedance (approximately 5 mΩ), enabling a continuous current flow of up to 12 A and a peak current of 40 A for short durations. This version does not block reverse current, making it suitable for applications such as battery-powered motor control, where energy recovery back to the power source is desirable.
The module includes large mounting holes that allow connection of wires or the use of 5 mm pitch screw terminals. Additionally, smaller 2.54 mm pitch holes are available for soldering standard pin headers. The bottom side of the board features pads for an optional transient voltage suppression (TVS) diode, enhancing system resilience against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse voltage protection up to -60 V
- Current capability: up to 12 A continuous, up to 40 A peak
- Power path impedance: approximately 5 mΩ
- Supports wires and terminals with 5 mm or 3.5 mm pitch
- Solder pads for optional TVS protection
- Dimensions: 7.6 x 12.7 mm
1196553
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
zł21.43
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł15.69
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387
zł20.20
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5386
zł14.22
Delivery date unknown
No product available!
Other products in the same category (16)
A compact stepper motor controller with a TMC2225 system with an operating voltage from 4.75 to 36 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the STEP/DIR interface and is an ideal solution for 3D printers and similar applications. BIGTREETECH TMC2225 V1.0
zł19.70
24h
Available quantity: 14
Available
Module with SSR 240V/2A relay controlled by 5V voltage with fuse. modSSR-1CH
zł8.43
24h
Available quantity: 30
Available
The ReSpeaker Lite kit with case, which uses the XMOS XU316 AI chipset and XIAO ESP32S3, offers precise audio processing with advanced features such as noise reduction and echo cancellation. Compatible with Raspberry Pi, Arduino and Home Assistant platforms, it is ideal for smart home applications, conference systems and smart speakers. Seeed Studio E24072601
zł148.74
4 weeks
No product available!
This advanced Nema 23 stepper motor controller from the CLRS series is designed for precision industrial applications with RS485 (Modbus RTU) network communication. It eliminates the risk of lost steps with closed-loop feedback and offers support for Profile Position, Velocity, Homing, and PR Mode with a 16-position point-to-point control table. The controller supports up to 31 axes on a single network, offers up to 7 A current, a 20 to 50 VDC supply voltage, and passive or active cooling, making it a reliable solution for robotics, automation, and CNC systems. CL2C-RS57
zł339.00
24h
Available quantity: 3
Available
3.3V Power Supply Module Board with Red Indicators, AMS1117-3.3V, RoHS
zł1.87
24h
Available quantity: 77
Available
High-quality digital-to-analog converter that allows for pure stereo audio playback without the need for I2C configuration or the MCLK pin. It supports I2S signals (BCLK, WSEL, DIN) and audio formats up to 32 bits and 384 kHz, providing an excellent signal-to-noise ratio (112 dB). Audio output is available via a 3.5 mm jack or on-board pads, and the module works best as a line output to amplifiers and audio systems. Adafruit 6250
zł24.66
24h
Available quantity: 4
Available
CAN module based on the SN65HVD230 system, allows you to connect a microcontroller with a CAN bus interface
zł20.49
24h
Available quantity: 29
Available
The Step-Down converter module on the MP1584EN chip converts the 4.5-28V input voltage to 12V output voltage with a maximum current of 3A and an efficiency of up to 92%. It is a compact device measuring 22 x 17 x 4 mm, operating in a temperature range of -20°C to 85°C, ideal for a variety of industrial applications.
zł3.95
4 weeks
No product available!
Data logger dedicated to Thing Plus tiles. It allows you to save data on a microSD card with the possibility of reading through the USB port. Supports cards up to 32 GB. SparkFun DEV-19217
zł158.78
24h
Available quantity: 1
Available
The KAmod Level Shift x4 module is a logic level converter that enables the connection of electronic systems powered by different voltages, such as 5 V and 3.3 V. The module provides four bidirectional channels that can operate with digital signals ranging from 1.8 V to 5 V. It is an excellent choice for level conversion in I2C bus applications.
zł14.90
24h
Available quantity: 281
Available
The USB Step-Up converter module in the housing allows you to adjust the voltage in the range of 3.5-15V to 0.5-30V, with a maximum current of 2A and a power of 15W. The device is characterized by high precision, voltage resolution 0.01V, current resolution 0.001A, voltage accuracy 0.3% and current accuracy 0.5%, and can operate in temperatures from -40°C to 85°C.
zł93.47
24h
Available quantity: 4
Available
8-channel voltage level converter module with an input voltage of 12 V and an output voltage of 3.3 V. Unidirectional, based on resistor dividers. Numato Lab NLVD00008
zł41.77
24h
Available quantity: 4
Available
The high-voltage converter module enables voltage conversion in the range of 12-30V with an output power of up to 360W and generates sparks up to 5 cm long. The device operates in the frequency range of 30Hz-50KHz and has compact dimensions of 75 x 70.6 x 14 mm.
zł26.90
4 weeks
No product available!
8-channel IO expander with 6 analog inputs. It communicates via the USB interface. Version with Pull-Up resistors. Numato Lab GP80001P
zł185.89
3 weeks
No product available!
150 W Step-Up converter with an output voltage of 15to 35 V, an input voltage of 10 to 32 V and a maximum current of up to 6 A
zł12.92
24h
Available quantity: 46
Available
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752
zł39.22
24h
Available quantity: 2
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381