Ideal Diode Reverse Voltage Protector - reverse voltage and current protection module 4-60V, 20A
ID: 1196547
5902186320857
zł24.22
Tax included
zł19.69 tax excl.
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity of up to -60 V. By utilizing an ideal diode controller LM74700-Q1 and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow. However, in the case of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features an extremely low power path impedance of approximately 3 mΩ, enabling continuous current flow of up to 20 A and peak currents of up to 50 A for several seconds. The protection mechanism operates in a bidirectional manner, meaning the module not only blocks reverse input voltage but also prevents current backflow from the load to the power source.
The module includes large mounting holes that allow the connection of 14 AWG wires or the use of 5 mm pitch screw terminals. Additionally, smaller holes with a 2.54 mm pitch enable the soldering of standard pin headers. The bottom of the board also features pads for optional transient voltage suppression (TVS) protection, enhancing system resistance against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse polarity protection up to -60 V
- Current handling: up to 20 A continuous, up to 50 A peak
- Power path impedance: approximately 3 mΩ
- Prevents current backflow from the load to the power source
- Supports 14 AWG wires and 5 mm pitch screw terminals
- Soldering points for optional TVS protection
- Dimensions: 12.7 x 15.2 mm
1196547
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
zł31.70
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383
zł18.51
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 00 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5382
zł14.17
Delivery date unknown
No product available!
Other products in the same category (16)
Step-Up/Step-Down converter module with input voltage from 8 to 40 V, output voltage of 12 V and output current of 3 A. SparkFun COM-18376
zł124.89
3 weeks
No product available!
Module with 2 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital inputs. Seeed Studio 103020134
zł188.52
24h
Available quantity: 2
Available
USB - RS232 adapter equipped with a USB type A connector and an RS232 connector in the DB9 female standard. It uses the original FTDI FT232RL chip, which guarantees a reliable connection between a variety of devices. Waveshare USB-TO-RS232-Female-Cable
zł46.16
24h
Available quantity: 14
Available
USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a mini USB connector. Waveshare PL2303 USB UART Board (mini) V2
zł13.21
24h
Available quantity: 12
Available
Two-way speaker crossover with a division frequency of 2500Hz/3000Hz. Works with 4 to 8 ohm speakers and offers up to 250 watts of power
zł43.21
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5386
zł23.37
24h
Available quantity: 3
Available
A set with a TIMI-96 module equipped with a 0.96" TFT LCD display with a resolution of 160x80 px, controlled by a PIXXI-28 controller and a Mates Programmer. SparkFun DEV-19252
zł289.90
3 weeks
No product available!
DC-DC Step-Up/Step-Down Converter Module. It has an input voltage of 1.4 to 16 V, an output voltage of 7.5 V and a maximum output current to 1 A. Pololu 4967
zł36.40
24h
Available quantity: 2
Available
Module with 2 5 V relays with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL001
zł167.43
24h
Available quantity: 1
Available
BMS protection module designed for 13 Li-Ion cells. It has a charging function with balancer option and an over-discharge protection function. Dedicated to an electric bicycle or scooter
zł66.68
4 weeks
No product available!
The module contains four 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select switching with high or low status. The module is equipped with screw connectors. modRL04_ISO
zł22.40
4 weeks
No product available!
Module with four 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-4CH-H
zł23.03
24h
Available quantity: 4
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł86.59
4 weeks
No product available!
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 15 V and a maximum input of up to 2 A. Pololu 4946
zł23.41
24h
Available quantity: 2
Available
Step-Up converter module XL6009 with adjustable output voltage from 1.3 to 35 V, input voltage from 3.8 to 32 V and a maximum output current of 3 A
zł8.76
24h
Available quantity: 59
Available
A cryptography kit that allows you to learn the basics of cryptographic authentication and the ATECC508A cryptographic co-processor. SparkFun KIT-18303
zł509.69
3 weeks
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388