Reverse Voltage Protector - reverse voltage protection module 4-60V, 25A
ID: 1196548
5902186320864
zł29.75
Tax included
zł24.19 tax excl.
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity up to -60 V. By utilizing the LM74500-Q1 ideal diode controller and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow; however, in the event of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features a very low power path impedance (approximately 1.5 mΩ), enabling a continuous current flow of up to 25 A and a peak current of 50 A for short durations. This version does not block reverse current, making it suitable for applications such as battery-powered motor control, where energy recovery back to the power source is desirable.
The module includes large mounting holes that allow connection of wires up to 14 AWG or the use of 5 mm pitch screw terminals. Additionally, smaller 2.54 mm pitch holes are available for soldering standard pin headers. The bottom side of the board features pads for an optional transient voltage suppression (TVS) diode, enhancing system resilience against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse voltage protection up to -60 V
- Current capability: up to 25 A continuous, up to 50 A peak
- Power path impedance: approximately 1.5 mΩ
- Supports wires up to 14 AWG and 5 mm pitch terminals
- Solder pads for optional TVS protection
- Dimensions: 12.7 x 15.2 mm
1196548
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
zł31.70
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł24.22
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5386
zł23.37
24h
Available quantity: 3
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381
zł16.41
24h
Available quantity: 5
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 30 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5380
zł12.25
24h
Available quantity: 5
Available
Other products in the same category (16)
Expansion board for XIAO, enabling easy CAN Bus communication by integrating MCP2515 and SN65HVD230. Ideal for applications in vehicles, industrial control systems and robotics, it provides reliable data exchange and easy integration into the XIAO ecosystem. Seeed Studio 105100001
zł49.88
4 weeks
No product available!
Module with a precise real time clock (RTC) DS3232. It has an integrated crystal resonator, built-in SRAM memory and communicates via the I2C interface. DFRobot DFR0821
zł54.97
24h
Available quantity: 3
Available
Adafruit 2217
zł157.99
24h
Available quantity: 1
Available
8-channel voltage level converter allowing for connection of systems operating with the voltage level of 1.8 V, 2.5 V, 3.3 V and 5 V. SparkFun BOB-19626
zł26.30
24h
Available quantity: 3
Available
The S9V11F3S5 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)
zł45.39
24h
Available quantity: 1
Available
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762
zł155.91
24h
Available quantity: 1
Available
Module with 8 analog inputs for current measurement in the range of 0 to 20 mA or 4 to 20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3082ADAM
zł225.93
24h
Available quantity: 3
Available
Zeenko ZK08-BM is a low-noise, wideband amplifier with a built-in battery, intended for operation in the 50 MHz – 8 GHz range. It provides high signal gain and compensation of losses in antenna paths. Thanks to its compact design and battery power, it performs excellently in mobile and measurement applications.
zł133.66
6 weeks
No product available!
Class A power amplifier with one channel, 10 W. Built on the popular design of J. Hood from 1969. The set includes 2 pieces
zł66.63
4 weeks
No product available!
Module with 4 SSR relays with a load of up to 3 A. The board communicates via the USB interface. Numato Lab SSR40001-AC
zł559.60
3 weeks
No product available!
A stepper motor driver for precise control of bipolar motors, offering six microstepping modes (from full to 1/32). It operates within a voltage range of 8.2V to 44V and delivers up to 1.5A per phase without cooling or up to 2.2A with a heatsink/fan, ensuring smooth and stable operation even at high speeds. Compatible with the popular A4988 and DRV8825 drivers, with an integrated regulator and overheating, overload, and short circuit protection, the TB67S581FNG is a reliable and versatile solution for applications requiring precise motion control. Pololu 2988
zł26.40
24h
Available quantity: 2
Available
Compact and efficient 5V 3A Step-Down converter module, ideal for voltage stabilization in demanding electronic projects
zł6.01
24h
Available quantity: 29
Available
Module with 5 A 250 VAC relay. DFRobot DFR0017
zł12.71
24h
Available quantity: 1
Available
2-channel stereo audio mixer module. It has four outputs, on which the summed signal from 2 inputs is available. It is powered with the voltage from 5 to 19 V
zł80.21
24h
Available quantity: 3
Available
Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119
zł245.34
24h
Available quantity: 1
Available
Three-way crossover with a crossover frequency of 900 Hz and 5000 Hz. It works with speakers with an impedance of 5 to 8 Ω and offers power up to 150 W
zł49.00
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387