SOUND CARD UGO UKD-1085 USB

8x8 pixel LED matrix display with red LEDs. The module is equipped with the 74HC595 controller and communicates via the I2C interface

6p male plug, straight for PCBs, 2.54mm, tinned, yellow. Set of 10 pieces

A glass fuse with dimensions of 5x20mm and a current of 0.2A is a fast-reacting protection of electronic devices against overload, supplied in a set of 100 pieces

The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232

Rod antenna 2.4G, gain 5dBi, connector type: IPEX/U.FL, RoHS

Camera module designed for RP2040 development boards. It uses the Himax HM01B0 sensor to achieve excellent performance in low light. ArduCAM B328

2.42-inch OLED display with a resolution of 128x64 pixels with an SSD1309 controller and an SPI interface. It provides high contrast, wide viewing angles, and reliable operation in temperatures from -30°C to 85°C. It operates at a voltage of 2.4 to 3.6 V, and the yellow display color ensures good readability even in low light. modOLED2.42-Y

Module with an analog TEMT6000 light intensity sensor. The output voltage is linearly correlated with the intensity of the incident light. The module is supplied with the voltage from 3.3 to 5V

Module with a capacitive fingerprint reader with UART and USB interface. Waveshare Capacitive Fingerprint Reader (B)

Cable with USB plugs type A and micro-USB (type B), cable length 1.8 m

ACS711EX Current Sensor Carrier -31A to +31A

The 9V 10W USB Step-Up Converter module converts 4.2-5.2V input voltage to 9V DC output voltage, with a maximum current of 2A and a conversion efficiency of 96%. The device can operate in a wide temperature range, from -40°C to 85°C, which makes it ideal for powering various electronic devices in harsh environments.

Module with 8 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4248

Universal test leads for Uni-T multimeters. The kit includes two test leads. Uni-T UT-L27

Module with a round, color LCD TFT display with a diagonal of 1.28" and a resolution of 240x240 pixels. Equipped with a touch panel. Communication is carried out via the SPI interface (display operation) and I2C (touch panel). Seeed Studio 104030087