

zł115.95 tax excl.
ESP32-S3-Touch-AMOLED-1.75 is a standard ESP32-S3 development board with an AMOLED display, touch, microphones, sensors, and Wi-Fi/Bluetooth support. It is suitable for building compact IoT and HMI devices where touch interaction, wireless communication, and audio support are essential.
ESP32-S3-Touch-AMOLED-1.75 is the standard version of the development board with a 1.75-inch AMOLED display at a resolution of 466×466 pixels. The device is based on the ESP32-S3R8 microcontroller with a dual-core Xtensa LX7 processor running up to 240 MHz, offering 2.4 GHz Wi-Fi and Bluetooth 5.0 LE support. The board integrates a touchscreen with a CST9217 panel, 16 MB Flash, 8 MB PSRAM, and a rich set of peripherals, making it well-suited for prototyping IoT devices, HMI, and interactive projects.
Onboard features include: a 6-axis QMI8658 sensor (accelerometer and gyroscope), PCF85063 RTC, two MEMS digital microphones with ES7210 echo cancellation, audio codec, microSD slot, and MX1.25 connector for an optional 3.7 V Li-ion battery. Power and programming are provided via the USB-C port. Thanks to its compact size and support for ESP-IDF and Arduino IDE, the board is a versatile solution for modern mobile and embedded applications.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
ESP32-S3-Touch-LCD-2.8B is an advanced development module with a 2.8" color IPS display and touch function, based on the ESP32-S3 microcontroller. Integrated communication interfaces, sensors, and numerous connectors make it a versatile platform for implementing HMI interface projects, IoT devices, and applications requiring user interaction with the screen. Support for ESP-IDF and Arduino IDE facilitates rapid software development and solution testing.
No product available!
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
ESP32-C3-LCD-0.71 is an advanced, energy-efficient development board featuring a round IPS display and wireless communication. It enables projects involving user interfaces, IoT systems, data monitoring, and wearable devices. With its compact size and GUI support, it is ideal for integration into miniature HMI devices.
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-Pico
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
ESP32-S3-LCD-2.8B is a development board with a high-resolution display, designed for projects requiring a clear visual interface and wireless communication. Integrated components such as an IMU, RTC, and battery power support make it a versatile platform for building graphical user interfaces and IoT applications without the need for touch control.
ESP32-S3-Touch-LCD-1.9 is an advanced development board with a 1.9" touch screen, based on the ESP32-S3R8 microcontroller, offering a rich set of communication and sensor features. Intended for HMI projects, motion monitoring, and interactive applications, it is well-suited for solutions requiring a compact display and precise touch control. Thanks to compatibility with Raspberry Pi Pico and support for ESP-IDF and Arduino IDE, it enables rapid development of advanced IoT systems.
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177
No product available!
Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377
Board with the WiFi ESP-12F (ESP8266) module and a 5 V relay. Equipped with an AC adapter
A standard device for communication with the ESP32 device under test (DUT) during production testing. Espressif ESP-BAT32
ESP32-C6-Touch-LCD-1.47-M is a version of the development board with an IPS display and ESP32-C6, equipped with Wi-Fi 6, Bluetooth 5, and a rich set of peripherals. With factory-soldered GPIO headers, it allows immediate use in prototyping IoT devices and HMI systems.
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
No product available!
A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28
DIY IoT kit that allows you to easily build a smart home with compatibility with ESPHome and Home Assistant, providing local control and privacy. The kit includes XIAO ESP32C3 modules, sensors for monitoring environmental parameters, detecting motion and controlling home appliances, which allows for the flexible creation of advanced IoT projects. Seeed Studio E22011026
ESP32-S3-Touch-AMOLED-1.75 is a standard ESP32-S3 development board with an AMOLED display, touch, microphones, sensors, and Wi-Fi/Bluetooth support. It is suitable for building compact IoT and HMI devices where touch interaction, wireless communication, and audio support are essential.