ESP32-S3 development board with 2.8″ display 240x320 - Waveshare 30241
ID: 1197668
5902186305038
zł111.40
Tax included
zł90.57 tax excl.
ESP32-S3-LCD-2.8B is a development board with a high-resolution display, designed for projects requiring a clear visual interface and wireless communication. Integrated components such as an IMU, RTC, and battery power support make it a versatile platform for building graphical user interfaces and IoT applications without the need for touch control.
Description
ESP32-S3-LCD-2.8B is a compact development board based on the ESP32-S3R8 microcontroller, featuring a 2.8-inch IPS display with a resolution of 480×640 pixels and a wide viewing angle. This version does not include a touch panel. The module integrates a dual-core Xtensa LX7 processor running up to 240 MHz, Wi-Fi 2.4 GHz, and Bluetooth 5 LE connectivity. Onboard are 16 MB of Flash, 8 MB of PSRAM, and a rich set of peripherals, including a QMI8658 IMU sensor, RTC, TF card slot, 3.7 V battery charging circuit, UART, I2C, and GPIO headers. It supports ESP-IDF and Arduino IDE, making it ideal for HMI graphics projects and embedded systems.
Features
- Processor: Xtensa 32-bit LX7 dual-core, up to 240 MHz
- Connectivity: Wi-Fi 2.4 GHz (802.11 b/g/n), Bluetooth 5 LE
- Memory: 512 KB SRAM, 384 KB ROM, 8 MB PSRAM, 16 MB Flash
- Display: 2.8" IPS, 480×640 resolution, 65K colors, ST7701 controller, SPI + RGB interface
- IMU: QMI8658 6-axis (accelerometer + gyroscope)
- RTC: PCF85063 with RTC battery connector
- TF card slot (located on the bottom of the board)
- 3.7 V lithium battery charging circuit (MX1.25 connector)
- USB Type-C for power, programming, and debugging
- Interfaces: UART, I2C, GPIO, IPEX1 connector for external antenna
- LED indicators: charging, power
- Software support: ESP-IDF and Arduino IDE
Included
- ESP32-S3-LCD-2.8B x1
- SH1.0 4PIN cable ~100 mm (2 pcs.)
1197668
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Expansion module with a DAC/ADC converter and a camera dedicated to FireBeetle ESP32. It allows you to create versatile IoT applications. DFRobot DFR0498
zł111.20
24h
Available quantity: 4
Available
Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377
zł201.38
24h
Available quantity: 3
Available
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
zł32.90
1 weeks
No product available!
Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575
zł57.17
24h
Available quantity: 3
Available
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4
zł28.02
4 weeks
No product available!
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
zł55.12
4 weeks
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
zł245.39
4 weeks
No product available!
Development board with WiFi / Bluetooth Espressif ESP32-WROVER module. The board is equipped with numerous peripheral systems, eg SD card slot, audio codec, a series of LEDs controlled by one line and a 9-axis IMU system. TTGO TAudio V1.5 ESP32-WROVER
zł136.15
4 weeks
No product available!
IoT development board equipped with ESP32 chip with WiFi and Bluetooth, has a USB-UART interface allowing programming via the USB port of the computer. DFRobot DFR0625
zł101.18
24h
Available quantity: 2
Available
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
Regular pricezł90.49zł70.74
24h
Available quantity: 4
Available
A device with modifiable functionality that works under the control of the NodeMCU ESP32 system. It combines two wireless technologies: Bluetooth 4.1 and WiFi. iNode MCU USB
Regular pricezł134.38zł93.48
24h
Available quantity: 2
Available
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
zł25.35
4 weeks
No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
zł118.28
24h
Available quantity: 1
Available
M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010
zł249.00
24h
Available quantity: 1
Available
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
zł47.75
24h
Available quantity: 5
Available
M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B
zł82.90
24h
Available quantity: 2
Available
ESP32-S3-LCD-2.8B is a development board with a high-resolution display, designed for projects requiring a clear visual interface and wireless communication. Integrated components such as an IMU, RTC, and battery power support make it a versatile platform for building graphical user interfaces and IoT applications without the need for touch control.