- New
ESP32-S3 Development Board with 1.54″ IPS Touch LCD 240 × 240 - Waveshare 33868
ID: 1204857
zł84.01
Tax included
zł68.30 tax excl.
Development board based on the ESP32-S3, featuring a 1.54″ IPS display with 240 × 240 resolution and 262K colors with capacitive touch panel, equipped with 2.4 GHz Wi-Fi, Bluetooth 5 LE, dual microphones, audio circuits, and a 6-axis IMU sensor. Supports 3.7 V battery power (not included). Waveshare ESP32-S3-Touch-LCD-1.54-EN
Description
Development board based on the ESP32-S3 microcontroller, featuring a 1.54″ IPS display with 240 × 240 resolution and 262K colors. The module supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE, enabling implementation of IoT projects, communication devices, and embedded systems.
The board integrates dual microphones and audio circuits (codec and amplifier), allowing audio processing, sound recording, and voice communication. A built-in IMU sensor (accelerometer and gyroscope) enables motion and gesture detection, while the capacitive touch panel allows implementation of a touch-based user interface.
A microSD (TF) card slot allows data storage and multimedia handling, while the USB Type-C interface provides power supply and programming. The board supports ESP-IDF and Arduino IDE environments for flexible development and integration.
An MX1.25 connector allows connection of a 3.7 V Li-Ion battery (not included) for portable applications.
- ESP32-S3R8 – dual-core processor, up to 240 MHz
- 16 MB NOR Flash
- NS4150B – audio power amplifier
- ES8311 – low-power audio codec
- ES7210
- battery charge and discharge management chip
- QMI8658 – 6-axis IMU (3-axis accelerometer + 3-axis gyroscope)
- PLUS button – user button
- PWR button – power button
- BOOT button
- microphones
- microSD (TF) card slot
- onboard antenna
- MX1.25 battery connector – 2-pin, for 3.7 V Li-Ion battery, supports charging and discharging
- USB Type-C port
- MX1.25 speaker connector
- 1.54″ display connector
Features
- ESP32-S3R8 microcontroller, dual-core, up to 240 MHz
- 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE
- memory: 512 KB SRAM, 384 KB ROM, 8 MB PSRAM, 16 MB Flash
- 1.54″ IPS display, 240 × 240 resolution, 262K colors
- capacitive touch panel (CST816)
- SPI interface, ST7789 driver
- dual microphones, ES8311 audio codec, NS4150B amplifier
- ES7210 audio processing and echo cancellation
- QMI8658 IMU (accelerometer + gyroscope)
- microSD (TF) card slot
- 3 user buttons + BOOT and PWR buttons
- USB Type-C connector
- 3.7 V battery connector (MX1.25) – charging and discharging
- I2C, UART interfaces (pads)
Kit includes
- ESP32-S3-Touch-LCD-1.54 board
- insulating sheet
1204857
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero
zł18.14
24h
Available quantity: 13
Available
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero-M
zł25.49
24h
Available quantity: 64
Available
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero-M
zł21.54
4 weeks
No product available!
Development board with ESP32-C6 Mini-1 module from Espressif. It supports WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4) protocol and offers various interface options including SPI, UART, LPUART, I2C, I2S, PWM LED controller, USB Serial/JTAG, ADC. Dedicated to IoT applications and battery-powered devices. SparkFun DEV-22925
zł109.41
24h
Available quantity: 1
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8
zł35.03
4 weeks
No product available!
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8-M
zł36.81
24h
Available quantity: 2
Available
A board with an ESP32 module equipped with a 1.28-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-Touch-LCD-1.28
zł95.58
24h
Available quantity: 1
Available
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3
zł166.98
24h
Available quantity: 8
Available
Development board with Espressif ESP32-S2 module. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks. It offers 4 MB of Flash memory. It is programmed via the USB Type-C connector using Arduino, MicroPython, CircuitPython or ESP-IDF. WeMos S2 Mini V1psRAM
zł17.74
4 weeks
No product available!
A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386
zł55.01
3 weeks
No product available!
A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28
zł71.38
4 weeks
No product available!
ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK
zł50.65
4 weeks
No product available!
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8
zł59.90
24h
Available quantity: 3
Available
A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484
zł53.41
24h
Available quantity: 3
Available
The ESP32-S3-BOX-3 is a development kit based on the ESP32-S3 SoC, ideal for creating AIoT, Edge AI, and IIoT applications. The ESP32-S3-WROOM-1 module supports WiFi 802.11 b/g/n (2.4 GHz) and Bluetooth 5.0, features 36 configurable GPIO pins, and includes a PCB antenna. It operates within a temperature range of -40 to +85°C with a supply voltage of 3.0 - 3.6V. The kit supports software solutions like ESP-BOX, ESP-SR, ESP-RainMaker, and ESP-Matter, facilitating the development of advanced IoT systems. ESP32-S3-BOX-3
zł325.00
24h
Available quantity: 1
Available
Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano-M
zł45.79
24h
Available quantity: 13
Available
Development board based on the ESP32-S3, featuring a 1.54″ IPS display with 240 × 240 resolution and 262K colors with capacitive touch panel, equipped with 2.4 GHz Wi-Fi, Bluetooth 5 LE, dual microphones, audio circuits, and a 6-axis IMU sensor. Supports 3.7 V battery power (not included). Waveshare ESP32-S3-Touch-LCD-1.54-EN