zł221.49 tax excl.
Development board based on ESP32-P4, featuring a 5″ IPS touch display with 720 × 1280 resolution, Wi-Fi 6 and Bluetooth 5 LE connectivity, as well as onboard audio circuits and dual microphones. Supports MIPI, USB Type-C, and GPIO interfaces, and includes an OV5647 camera for IoT, HMI, and vision-based applications. Waveshare ESP32-P4-WIFI6-Touch-LCD-5-C
Development board based on the ESP32-P4 microcontroller, equipped with a 5″ IPS display with 720 × 1280 resolution and a 5-point capacitive touch panel. The module supports 2.4 GHz Wi-Fi 6 and Bluetooth 5 LE via the ESP32-C6 co-processor, enabling advanced IoT, embedded systems, and edge computing applications.

Integrated audio circuits (ES8311 codec and ES7210 echo cancellation chip) along with dual microphones enable audio processing, voice communication, and voice control interfaces. The RISC-V architecture combined with support for image processing (ISP, JPEG, H.264) allows use in multimedia systems and AI applications.


A microSD card slot enables data storage, while USB Type-C interfaces (USB OTG and UART) provide power, programming, and communication. The 40-pin GPIO header enables integration with expansion modules, including selected Raspberry Pi HATs. The MIPI-CSI connector allows camera connection, and the included OV5647 camera enables image capture, video processing, and vision-based system development without additional modules.
The MX1.25 connector allows connection of a 3.7 V Li-Ion battery (not included) for portable applications.

Manufacturer
Responsible person
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
Development board with ESP-WROOM-32 module. It allows communication within the WiFi network and the Bluetooth 4.2 (BLE) standard
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775
Development board with WiFi ESP32-S2 module and 1.54" TFT LCD display. Equipped with a pressure, temperature and humidity sensor. Dedicated to build a home automation system. Adafruit 4985
Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series
Powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32E 32MBit (4MB)
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the ESP32 chip to the project. SparkFun WRL-18430
Development board with WiFi and Bluetooth ESP32 module. It has been equipped with industrial interfaces RS485 and CAN. TTGO T-CAN485 ESP32
No product available!
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare 21178
Board with the WiFi ESP-12F (ESP8266) module and a 5 V relay. Equipped with an AC adapter
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
Development board based on ESP32-P4, featuring a 5″ IPS touch display with 720 × 1280 resolution, Wi-Fi 6 and Bluetooth 5 LE connectivity, as well as onboard audio circuits and dual microphones. Supports MIPI, USB Type-C, and GPIO interfaces, and includes an OV5647 camera for IoT, HMI, and vision-based applications. Waveshare ESP32-P4-WIFI6-Touch-LCD-5-C