ESP32 development kit with OLED display
ID: 577502
zł109.93
Tax included
zł89.37 tax excl.
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. The core of the board is the ESP32 module with a microcontroller clocked at 240 MHz and logic working in the voltage range from 0 to 3.3 V. Programming the board is extremely easy thanks to the support in the form Arduino IDE environment ensuring quick start of projects related to IoT technology.
The built-in lithium polymer battery connector and charger module allow you to connect a Li-Pol battery. The battery is charged via the mounted USB connector. The module also has a USB-UART converter function.
Features
- ESP32 module:
- Xtensa dual-core CPU, 32-bit LX6, 240 MHz
- 520 kB SRAM
- Wi-Fi: 802.11 b/g/n
- Bluetooth: v4.2 BR/EDR and BLE
- Built-in antenna
- 0.96 "OLED display
- 16 MB Flash external memory
- Lithium battery charging circuit
- USB-UART TTL CP2102 converter module
- Dimensions: 50 x 25.3 mm
Kit contains
- Set with ESP32 module and display
- 2 x 18-pin male connector
- Cable
577502
You might also like
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
zł20.54
24h
Available quantity: 8
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł113.95
24h
Available quantity: 3
Available
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4
zł35.60
24h
Available quantity: 182
Available
Other products in the same category (16)
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3
zł244.91
24h
Available quantity: 1
Available
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
Regular pricezł57.17zł52.90
24h
Available quantity: 12
Available
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
zł33.94
24h
Available quantity: 104
Available
Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177
zł174.70
24h
Available quantity: 1
Available
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-Pico
zł44.30
24h
Available quantity: 15
Available
Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775
zł125.87
24h
Available quantity: 3
Available
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
zł244.76
24h
Available quantity: 2
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł41.84
24h
Available quantity: 19
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł52.90
24h
Available quantity: 11
Available
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero
zł26.01
24h
Available quantity: 50
Available
M5Stack series development kit equipped with ESP32 chip. It has a built-in microphone and is dedicated to applications that require speech recognition. M5Stack K117
zł88.90
24h
Available quantity: 3
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8
zł35.87
24h
Available quantity: 4
Available
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
zł253.40
6 weeks
No product available!
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M
zł54.30
24h
Available quantity: 38
Available
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
zł32.90
6 weeks
No product available!
DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. DFR0482
zł24.00
24h
Available quantity: 2
Available
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO