WiFi module ESP-12S with ESP8266 chip
ID: 574817
zł10.58
Tax included
zł8.60 tax excl.
WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
ESP-12S is a WiFi module developed by AI-Thinker Co., Ltd with an ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. The module is a high-quality wireless SOC, designed for designers of mobile platforms with limited space and power.
The module can be alternatively (as a Wi-Fi adapter with wireless internet access) used in every project based on a microcontroller with simple connectivity (SPI / SDIO or I2C / UART interface).
properties
- WiFi 802.11 b / g / n communication
- 32-bit low power MCU
- 10-bit ADC converter
- A stack of TCP / IP protocols
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators and energy management units
- Wi-Fi 2.4 GHz, WPA / WPA2 support
- Support for STA / AP / STA + AP operation modes
- Support for Smart Link functions for Android and iOS devices
- Interfaces SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIO
- Aggregation of A-MPDU and A-MSDU and protection interval of 0.4 s
- Power consumption in sleep mode <10 uA, leakage current at switch-off <5 uA
- Wake up in <2 ms
- Power consumption in standby mode <1.0 mW
- Output power + 20dBm in 802.11b mode
- 3.3 V power supply
- Working temperature range -40 ~ 85 ° C
- Dimensions: 18 x 20 x 3 mm
574817
Data sheet
- Logic voltage
- 3,3 V
- Wi-Fi chip
- ESP8266
- Wi-Fi standard
- 802.11 b/g/n
- Frequency range
- 2,4 GHz
- Baud rate
- 72,2 Mbps
- Antenna connector
- Brak
- Power supply voltage
- 3,3 V
You might also like
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.
zł10.96
Delivery date unknown
No product available!
WiFi 802.11 b/g/n module with ESP8266 system, 16 terminals are available with a 2 mm pitch with the possibility of soldering gold pins, there are 9 GPIO lines and 1 ADC line on the connector. Built-in ceramic antenna and U.FL antenna connector. ESP-07
zł11.89
24h
Available quantity: 65
Available
WiFi 802.11 b/g/n module with ESP8266 system, they have 22 edge terminals with 2 mm raster with the possibility of soldered gold connectors, 9 GPIO lines and 1 ADC line on the connector. Built-in PCB antenna. ESP-12E
zł10.25
24h
Available quantity: 136
Available
Other products in the same category (16)
WiFi module based on ESP8266. The module has a built-in antenna and USB-UART converter. The module can be programmed in Lua (under the control of the NodeMCU firmware) or in the Arduino environment. 10 GPIO lines are available which each can be configured to work as PWM, I2C.
zł32.69
24h
Available quantity: 21
Available
BMP180 temperature / pressure sensor module compatible with WeMos D1 mini board.
zł6.40
24h
Available quantity: 23
Available
The base board for the Wi-Fi NodeMCU module (ESP-12E), thanks to the built-in L293DD system, allows for attaching e.g. motors, electromagnets or other executive devices. The I/O lines of the NodeMCU module were derived to the pin connectors, and the power supply can be connected with the use of screw connectors. ESP12E Motor Shield
zł7.87
24h
Available quantity: 39
Available
Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05
zł17.90
24h
Available quantity: 25
Available
ESP8266 based Arduino board for ArduCAM mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. ArduCAM B0082
zł87.55
4 weeks
No product available!
Easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with the ‘widgets’ within the Blynk mobile app to create your next IoT project. WRL-13794
zł188.04
24h
Available quantity: 2
Available
Wifi module with ESPR8266 ESPRESSIF for communication in the 2.4 GHz band. It is powered by a voltage from 3 V to 3.6 V, available in an SMD enclosure. ESP-WROOM-02
zł10.69
24h
Available quantity: 7
Available
WiFi 802.11 b/g/n module with ESP8266 system, they have 22 edge terminals with 2 mm raster with the possibility of soldered gold connectors, 9 GPIO lines and 1 ADC line on the connector. Built-in PCB antenna. ESP-12E
zł10.25
24h
Available quantity: 136
Available
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.
zł10.96
6 weeks
No product available!
WiFi 802.11 b/g/n module with ESP8266 chip, there are 8 pins with UART and GPIO interface. Built-in PCB antenna. SparkFun WRL-17146
zł50.02
24h
Available quantity: 3
Available
The module is based on the ESP8266MOD chip. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks, which allows for Internet access and data exchange. WeMos D1 Mini Type-C
zł15.51
24h
Available quantity: 9
Available
Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series
zł10.12
24h
Available quantity: 13
Available
Module with round 1.28" IPS LCD display and 240x240 px resolution and ESP-12E chip. SB Components 24025
zł239.00
24h
Available quantity: 3
Available
Development kit with WiFi / Bluetooth module ESP8266 and 0.96 "OLED display.
zł74.89
24h
Available quantity: 7
Available
Development board D1 Mini Pro with WiFi ESP8266 module and 16 MB Flash memory, equipped with ceramic antenna and external antenna connector. The module can be programmed from the Arduino IDE level. WeMos D1 Mini Pro
zł35.40
24h
Available quantity: 16
Available
The module is based on the ESP8266EX chip. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks, which allows for Internet access and data exchange. It is programmed via the USB Type-C connector using Arduino, MicroPython or NodeMCU. WeMos D1 Mini Type-C
zł16.11
Delivery date unknown
No product available!
WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S